Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free
- BOND RX™ Validated
- Recombinant
- Advanced Validation
- RabMAb
- What is this?
Be the first to review this product! Submit a review
|
(0 Publication)
Rabbit Recombinant Monoclonal Aquaporin 3 antibody. Carrier free. Suitable for WB, IHC-P, Flow Cyt (Intra), IP, mIHC and reacts with Human samples.
View Alternative Names
Aquaporin-3, AQP-3, Aquaglyceroporin-3, AQP3
- mIHC
Lab
Multiplex immunohistochemistry - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was developed using ab307969, the same antibody clone in a different buffer formulation.
Multiplex immunohistochemistry analysis of formalin/PFA-fixed paraffin-embedded human skin staining Collagen VII with ab309143 at a 1/100 dilution, ab307969 anti-Aquaporin 3 used at 1/5000 dilution and ab221155 anti-FLG used at a 1/1000 dilution.
Panel A : merged staining of anti-Collagen VII (green; Opal™520), anti-Aquaporin 3 (magenta; Opal™690) and anti-FLG (gray; Opal™570) on human skin.
Panel B : anti-Collagen VII staining basement membrane in human skin.
Panel C : anti-Aquaporin 3 staining squamous epithelium in human skin.
Panel D : anti-FLG staining maturing squamous cells in human skin.
Nuclear DNA was labeled with DAPI (shown in blue).
The section was incubated in three rounds of staining : in the order of ab309143, ab307969 and ab221155 for 30 mins at room temperature. Each round was followed by a separate fluorescent tyramide signal amplification system.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument with an Opal™ 4-color kit. Image acquisition was performed with Leica SP8 confocal microscope.
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins.
- mIHC
Supplier Data
Multiplex immunohistochemistry - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) analysis of Human skin tissue labelling Aquaporin 3 with ab307969 at 1/5000 dilution (0.094 µg/mL) (B), Loricrin with ab176322 at 1/3000 dilution (0.031 μg/ml) (C) and Filaggrin with ab221155 at 1/2000 dilution (0.523 μg/ml) (D). Opal Polymer HRP Ms + Rb was used as a secondary antibody, and DAPI was used for a nuclear counter stain. Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins. Panel A : merged staining of anti-Aquaporin 3 (magenta; Opal™690), anti-Loricrin (green; Opal™520) and anti-Filaggrin (red; Opal™570) on human skin. Panel B : anti-Aquaporin 3 stained on keratinocytes from the stratum basale to the stratum granulosum of the epidermis. Panel C : anti-Loricrin stained on stratum corneum. Panel D : anti-Filaggrin stained on the granular to stratum corneum transition. The section was incubated in three rounds of staining : in the order of ab307969, ab176322, and ab221155 for 30 mins at room temperature. Each round was followed by a separate fluorescent tyramide signal amplification system. The immunostaining was performed on a Leica Biosystems BOND® RX instrument with an Opal™ 4-color kit. Image acquisition was performed with Leica SP8 confocal microscope.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was produced using ab307969, the same clone but in a different formulation. Immunohistochemical analysis of paraffin-embedded human cerebrum tissue labeling Aquaporin 3 with ab307969 at 1/5000 dilution (0.094 ug/ml) followed by ready to use LeicaDS9800 (Bond® Polymer Refine Detection). Negative control : no staining on human cerebrum. The section was incubated with ab307969 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin. Secondary antibody only control : Secondary antibody is ready to use LeicaDS9800 (Bond® Polymer Refine Detection). Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was produced using ab307969, the same clone but in a different formulation. Immunohistochemical analysis of paraffin-embedded human kidney tissue labeling Aquaporin 3 with ab307969 at 1/5000 dilution (0.094 ug/ml) followed by ready to use LeicaDS9800 (Bond® Polymer Refine Detection). Positive staining on human kidney. The section was incubated with ab307969 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin. Secondary antibody only control : Secondary antibody is ready to use LeicaDS9800 (Bond® Polymer Refine Detection). Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was produced using ab307969, the same clone but in a different formulation. Immunohistochemical analysis of paraffin-embedded human skin tissue labeling Aquaporin 3 with ab307969 at 1/5000 dilution (0.094 ug/ml) followed by ready to use LeicaDS9800 (Bond® Polymer Refine Detection). Positive staining on human skin. The section was incubated with ab307969 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin. Secondary antibody only control : Secondary antibody is ready to use LeicaDS9800 (Bond® Polymer Refine Detection). Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
- Flow Cyt (Intra)
Supplier Data
Flow Cytometry (Intracellular) - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was produced using ab307969, the same clone but in a different formulation. Flow cytometric analysis of 4% paraformaldehyde fixed 90% methanol permeabilized U-87 MG (human glioblastoma-astrocytoma epithelial cell) (Left panel) compared to A431 (human epidermoid carcinoma epithelial cell) (Right panel) cells labelling Aquaporin 3 with ab307969 at 1/500 dilution (0.1 ug) (Red) compared with a Rabbit monoclonal IgG (ab172730) (Black) isotype control and an unlabelled control (cells without incubation with primary antibody and secondary antibody) (Blue). A Goat Anti-Rabbit IgG (Alexa Fluor® 488, ab150081) at 1/5000 dilution was used as the secondary antibody.
- IP
Supplier Data
Immunoprecipitation - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was produced using ab307969, the same clone but in a different formulation.
Aquaporin 3 was immunoprecipitated from 0.35 mg A431 (human epidermoid carcinoma epithelial cell) whole cell lysate with ab307969 at 1/30 dilution (2ug in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab307969 at 1/1000 dilution. VeriBlot for IP secondary antibody(HRP)(ab131366) was used at 1/5000 dilution.
Lane 1 : A431 (human epidermoid carcinoma epithelial cell) whole cell lysate
Lane 2 : ab307969 IP in A431 (human epidermoid carcinoma epithelial cell) whole cell lysate
Lane 3 : Rabbit monoclonal IgG (ab172730) instead of ab307969 in A431 (human epidermoid carcinoma epithelial cell) whole cell lysate
Blocking and dilution buffer and concentration : 5% NFDM/TBST.
All lanes:
Immunoprecipitation - Anti-Aquaporin 3 antibody [EPR28053-11] (<a href='/en-us/products/primary-antibodies/aquaporin-3-antibody-epr28053-11-ab307969'>ab307969</a>) at 1/30 dilution
All lanes:
A431 (human epidermoid carcinoma epithelial cell) whole cell lysate
Secondary
All lanes:
Immunoprecipitation - VeriBlot for IP Detection Reagent (HRP) (<a href='/en-us/products/reagents/veriblot-for-ip-detection-reagent-hrp-ab131366'>ab131366</a>) at 1/5000 dilution
Predicted band size: 31 kDa
Observed band size: 31 kDa
false
- WB
Supplier Data
Western blot - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was developed using ab307969, the same antibody clone in a different buffer formulation. Blocking and diluting buffer and concentration : Negative control : brain(PMID : 10737773) In Western blot, anti-GAPDH antibody (ab181602) loading control staining at 1/200000 dilution. Exposure time : 180 seconds Negative control : brain(PMID : 10737773)
All lanes:
Western blot - Anti-Aquaporin 3 antibody [EPR28053-11] (<a href='/en-us/products/primary-antibodies/aquaporin-3-antibody-epr28053-11-ab307969'>ab307969</a>)
Lane 1:
Human kidney tissue lysate at 20 mg/mL
Lane 2:
Human brain tissue lysate at 20 mg/mL
Secondary
All lanes:
Western blot - VeriBlot for IP Detection Reagent (HRP) (<a href='/en-us/products/reagents/veriblot-for-ip-detection-reagent-hrp-ab131366'>ab131366</a>) at 1/1000 dilution
Predicted band size: 31 kDa
Observed band size: 35 kDa
false
Exposure time: 180s
- WB
Supplier Data
Western blot - Anti-Aquaporin 3 antibody [EPR28053-11] - BSA and Azide free (AB307970)
This data was developed using ab307969, the same antibody clone in a different buffer formulation. Blocking and diluting buffer and concentration : 5% NFDM/TBST In Western blot, anti-GAPDH antibody (ab181602) loading control staining at 1/200000 dilution. Exposure time : 180 seconds
All lanes:
Western blot - Anti-Aquaporin 3 antibody [EPR28053-11] (<a href='/en-us/products/primary-antibodies/aquaporin-3-antibody-epr28053-11-ab307969'>ab307969</a>) at 1/1000 dilution
All lanes:
HEK-293 (human embryonic kidney epithelial cell) whole cell lysate at 20 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Predicted band size: 31 kDa
Observed band size: 35 kDa
false
Exposure time: 180s
Related conjugates and formulations (1)
-
Anti-Aquaporin 3 antibody [EPR28053-11]
Reactivity data
Product details
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Supplementary information
This supplementary information is collated from multiple sources and compiled automatically.
Biological function summary
Aquaporin channels such as AQP3 aid in the osmotic balance and are part of the cell membrane's permeability machinery. AQP3 forms functional homotetrameric structures that integrate into the plasma membrane. Each monomer of AQP3 contains a pore for the passage of water and other small molecules. This structural arrangement allows cells to regulate fluid movement and maintain homeostasis particularly in epithelial tissues.
Pathways
AQP3 engages in the regulation of transepithelial water movement and is involved in glycerol metabolism pathways. It interacts with proteins such as AQP1 and AQP4 supporting fluid transport across various organs. In epidermal cells AQP3 plays a role in the glycerol transport pathway important for skin barrier function and wound healing processes. Its role in these pathways highlights its contribution to cellular hydration and metabolic functions.
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com