Rabbit Recombinant Monoclonal ASIC3 antibody. Suitable for WB, IHC-P, IP, ICC/IF and reacts with Mouse, Rat, Transfected cell line - Mouse samples.
pH: 7.2 - 7.4
Preservative: 0.01% Sodium azide
Constituents: PBS, 40% Glycerol (glycerin, glycerine), 0.05% BSA
WB | IHC-P | IHC-Fr | IP | ICC/IF | |
---|---|---|---|---|---|
Human | Not recommended | Not recommended | Not recommended | Not recommended | Not recommended |
Mouse | Tested | Tested | Not recommended | Not recommended | Expected |
Rat | Tested | Tested | Not recommended | Tested | Expected |
Transfected cell line - Mouse | Not recommended | Not recommended | Not recommended | Not recommended | Tested |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info 1/1000 | Notes Please load at least 40ug of lysate to improve the Western blot results. |
Species Rat | Dilution info 1/1000 | Notes Please load at least 40ug of lysate to improve the Western blot results. |
Species | Dilution info | Notes |
---|---|---|
Species Human, Transfected cell line - Mouse | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info 1/5000 | Notes - |
Species Rat | Dilution info 1/5000 | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human, Transfected cell line - Mouse | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info - | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Rat | Dilution info - | Notes - |
Species Human | Dilution info - | Notes - |
Species Transfected cell line - Mouse | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Rat | Dilution info 1/30 | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Human, Transfected cell line - Mouse | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Transfected cell line - Mouse | Dilution info 1/4000 | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Rat | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human | Dilution info - | Notes - |
Cation channel with high affinity for sodium, which is gated by extracellular protons and inhibited by the diuretic amiloride. Generates a biphasic current with a fast inactivating and a slow sustained phase. In sensory neurons is proposed to mediate the pain induced by acidosis that occurs in ischemic, damaged or inflamed tissue. May be involved in hyperalgesia. May play a role in mechanoreception. Heteromeric channel assembly seems to modulate channel properties.
Accn3, Drasic, Asic3, Acid-sensing ion channel 3, ASIC3, Amiloride-sensitive cation channel 3, Dorsal root ASIC, DRASIC
Rabbit Recombinant Monoclonal ASIC3 antibody. Suitable for WB, IHC-P, IP, ICC/IF and reacts with Mouse, Rat, Transfected cell line - Mouse samples.
pH: 7.2 - 7.4
Preservative: 0.01% Sodium azide
Constituents: PBS, 40% Glycerol (glycerin, glycerine), 0.05% BSA
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
This product is a recombinant monoclonal antibody, which offers several advantages including:
For more information, read more on recombinant antibodies.
ASIC3 also known as Acid-Sensing Ion Channel 3 or DRASIC is a protein channel involved in detecting variations in pH. This protein has a molecular mass of approximately 56 kDa and falls within the ASIC family of proton-gated sodium channels. ASIC3 is widely expressed in peripheral sensory neurons particularly in dorsal root and trigeminal ganglia which are areas pivotal for detecting pain and mechanosensation. The localization suggests a specialized role in responding to acidic environments.
ASIC3 functions through responding to changes in extracellular pH allowing sodium ions to enter cells when the pH decreases. It does not act solo and usually forms homomeric or heteromeric complexes with other ASIC subunits such as ASIC1 or ASIC2. This combination enhances its sensitivity and response diversity to varying acidic conditions contributing to processes like pain sensing and mechanotransduction. In muscle tissue ASIC3 plays a role in sensing metabolic changes that occur during intensive exercise.
ASIC3 integrates into systems related to pain and mechanosensory pathways. It participates prominently in the nociceptive signaling pathway associated with the perception of pain induced by protons. ASIC3 works alongside proteins such as TRPV1 another ion channel known for its role in pain and thermal sensation. Interconnected with these pathways ASIC3 impacts physiological responses like hyperalgesia in acidic environments.
ASIC3 significantly contributes to conditions such as chronic pain and acid-induced pain from tissue injury or inflammation. It associates with migraines and inflammatory pain magnifying pain sensations under acidic conditions. In these contexts ASIC3 collaborates with proteins like the NaV1.7 sodium channel further influencing nerve excitability and pain perception. Targeting ASIC3 could potentially alleviate symptoms associated with these pain disorders.
We have tested this species and application combination and it works. It is covered by our product promise.
We have not tested this specific species and application combination in-house, but expect it will work. It is covered by our product promise.
This species and application combination has not been tested, but we predict it will work based on strong homology. However, this combination is not covered by our product promise.
We do not recommend this combination. It is not covered by our product promise.
We are dedicated to supporting your work with high quality reagents and we are here for you every step of the way should you need us.
In the unlikely event of one of our products not working as expected, you are covered by our product promise.
Full details and terms and conditions can be found here:
Terms & Conditions.
ASIC3 was immunoprecipitated from 0.35 mg rat dorsal ganglion tissue lysate with ab302776 at 1/30 dilution (2 µg in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab302776 at 1/1000 dilution.
Blocking and dilution buffer and concentration: 5% NFDM/TBST.
Samples are non-boiled as boiling may cause protein aggregates in lane 1.
This blot was developed using a high sensitivity ECL substrate. The high-sensitivity ECL substrate used allows for the detection of proteins in the mid-femtogram range.
All lanes: Immunoprecipitation - Anti-ASIC3 antibody [EPR26557-80] (ab302776) at 1/1000 dilution
Lanes 1 - 2: Rat dorsal ganglion tissue lysate at 10 µg
Lane 3: Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of ab302776 in rat dorsal ganglion tissue lysate at 10 µg
All lanes: Immunoprecipitation - VeriBlot for IP Detection Reagent (HRP) (VeriBlot for IP Detection Reagent (HRP) ab131366) at 1/5000 dilution
Developed using the ECL technique.
Performed under non-reducing conditions.
Predicted band size: 58 kDa
Observed band size: 60 kDa
Exposure time: 93s
ASIC3 Western blot staining using rabbit Anti-ASIC3 antibody
Blocking and diluting buffer and concentration: 5% NFDM/TBST.
It is recommended to optimize experimental conditions by increasing the sample loading amount, using a lower antibody dilution ratio, and employing femtogram-level sensitivity substrates.
Lanes 1 - 4: Western blot - Anti-ASIC3 antibody [EPR26557-80] (ab302776) at 1/1000 dilution
Lanes 5 - 8: Western blot - Anti-ASIC3 antibody [EPR26557-87] (Anti-ASIC3 antibody [EPR26557-87] ab305243) at 1/1000 dilution
Lanes 1 and 5: Mouse dorsal ganglion tissue lysate at 20 µg
Lanes 2 and 6: Rat dorsal ganglion tissue lysate at 20 µg
Lanes 3 and 7: Mouse dorsal ganglion tissue lysate at 40 µg
Lanes 4 and 8: Rat dorsal ganglion tissue lysate at 40 µg
All lanes: Western blot - Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/20000 dilution
Predicted band size: 58 kDa
Observed band size: 60 kDa
Exposure time: 180s
Blocking and diluting buffer and concentration: 5% NFDM/TBST
The MW is consistent with what has been described in the literature (PMID: 17012229).
Negative control: rat: hippocampus, spinal cord, kidney, testis (PMID:11872753).
Samples are non-boiled as boiling may cause protein aggregates.
This blot was developed using a high sensitivity ECL substrate in lane 6 and 7. The high-sensitivity ECL substrate used allows for the detection of proteins in the mid-femtogram range.
Exposure time:
Lane 1-5: 180 seconds
Lane 6 and 7: 37 seconds.
All lanes: Western blot - Anti-ASIC3 antibody [EPR26557-80] (ab302776) at 1/1000 dilution
Lane 1: Rat dorsal ganglion tissue lysate at 75 µg
Lane 2: Rat hippocampus tissue lysate at 75 µg
Lane 3: Rat spinal cord tissue lysate at 75 µg
Lane 4: Rat kidney tissue lysate at 75 µg
Lane 5: Rat testis tissue lysate at 75 µg
Lane 6: Mouse dorsal ganglion tissue lysate at 75 µg
Lane 7: Mouse hippocampus tissue lysate at 75 µg
All lanes: Western blot - Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/20000 dilution
Developed using the ECL technique.
Performed under non-reducing conditions.
Predicted band size: 58 kDa
Observed band size: 60 kDa
Immunofluorescent analysis of 4% Paraformaldehyde-fixed, 0.1% TritonX-100 permeabilized 293T (human embryonic kidney epithelial cell) cells labelling ASIC3 with ab302776 at 1/4000 (0.124 ug/ml) dilution, followed by Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed ab150081 Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed antibody at 1/1000 2 ug/ml dilution (Green). Confocal image showing positive staining in HEK-293T cells transfected with a mouse ASIC3 expression vector containing a myc tag. Image was taken with a confocal microscope (Leica-Microsystems, TCS SP8). ICC has not been tested with endogenous material. is observed. Myc-Tag Mouse mAb (Alexa Fluor® 647) was used to counterstain tubulin at 1/100 0.38 ug/ml dilution (Red). The Nuclear counterstain was DAPI (Blue). Secondary antibody only control: Secondary antibody is Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed ab150081 Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed at 1/1000 2 ug/ml dilution.
Immunohistochemical analysis of paraffin-embedded Mouse testis tissue labeling ASIC3 with ab302776 at 1/5000 (0.1 ug/ml) followed by a LeicaDS9800 (Bond Polymer Refine Detection) was used at Ready to use dilution. Negative control: no staining on mouse testis (PMID:11872753). The section was incubated with ab302776 for 30 mins at room temperature.The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin. Secondary antibody only control: Secondary antibody is LeicaDS9800 (Bond Polymer Refine Detection) was used at Ready to use dilution. Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
Immunohistochemical analysis of paraffin-embedded Rat dorsal root gang tissue labeling ASIC3 with ab302776 at 1/5000 (0.1 ug/ml) followed by a LeicaDS9800 (Bond Polymer Refine Detection) was used at Ready to use dilution. Positive staining on rat dorsal root ganglion (PMID: 9707631). The section was incubated with ab302776 for 30 mins at room temperature.The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin. Secondary antibody only control: Secondary antibody is LeicaDS9800 (Bond Polymer Refine Detection) was used at Ready to use dilution. Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
Immunohistochemical analysis of paraffin-embedded Mouse dorsal root ga tissue labeling ASIC3 with ab302776 at 1/5000 (0.1 ug/ml) followed by a LeicaDS9800 (Bond Polymer Refine Detection) was used at Ready to use dilution. Positive staining on mouse dorsal root ganglion. The section was incubated with ab302776 for 30 mins at room temperature.The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin. Secondary antibody only control: Secondary antibody is LeicaDS9800 (Bond Polymer Refine Detection) was used at Ready to use dilution. Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com