Skip to main content

Rabbit Recombinant Monoclonal BRG1 antibody. Carrier free. Suitable for ChIC/CUT&RUN-seq, IP, IHC-P, WB, ICC/IF, Flow Cyt (Intra) and reacts with Human, Mouse, Rat samples. Cited in 1 publication.

Be the first to review this product! Submit a review

Images

Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (AB222230), expandable thumbnail
  • Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (AB222230), expandable thumbnail
  • Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (AB222230), expandable thumbnail
  • Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (AB222230), expandable thumbnail
  • Flow Cytometry (Intracellular) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (AB222230), expandable thumbnail

Publications

Key facts

Isotype
IgG
Host species
Rabbit
Storage buffer

pH: 7.2 - 7.4
Constituents: PBS

Form
Liquid
Clonality
Monoclonal

Immunogen

  • The exact immunogen used to generate this antibody is proprietary information.

Reactivity data

Select an application
Product promiseTestedExpectedPredictedNot recommended
ChIC/CUT&RUN-seqIPIHC-PWBICC/IFFlow Cyt (Intra)
Human
Tested
Tested
Tested
Tested
Tested
Tested
Mouse
Expected
Tested
Tested
Tested
Expected
Expected
Rat
Expected
Expected
Tested
Tested
Expected
Expected

Tested
Tested

Species
Human
Dilution info
-
Notes

-

Expected
Expected

Species
Mouse, Rat
Dilution info
Use at an assay dependent concentration.
Notes

-

Tested
Tested

Species
Human, Mouse
Dilution info
-
Notes

-

Expected
Expected

Species
Rat
Dilution info
Use at an assay dependent concentration.
Notes

-

Tested
Tested

Species
Rat
Dilution info
-
Notes

Heat up to 98 degrees C, below boiling, and then let cool for 10-20 min.

Perform heat-mediated antigen retrieval before commencing with IHC staining protocol.

Species
Mouse
Dilution info
-
Notes

Heat up to 98 degrees C, below boiling, and then let cool for 10-20 min.

Perform heat-mediated antigen retrieval before commencing with IHC staining protocol.

Species
Human
Dilution info
-
Notes

Heat up to 98 degrees C, below boiling, and then let cool for 10-20 min.

Perform heat-mediated antigen retrieval before commencing with IHC staining protocol.

Tested
Tested

Species
Human, Mouse, Rat
Dilution info
-
Notes

-

Tested
Tested

Species
Human
Dilution info
-
Notes

-

Expected
Expected

Species
Mouse, Rat
Dilution info
Use at an assay dependent concentration.
Notes

-

Tested
Tested

Species
Human
Dilution info
-
Notes

-

Expected
Expected

Species
Mouse, Rat
Dilution info
Use at an assay dependent concentration.
Notes

-

Associated Products

Select an associated product type

10 products for Alternative Product

8 products for Alternative Version

Target data

Function

Involved in transcriptional activation and repression of select genes by chromatin remodeling (alteration of DNA-nucleosome topology). Component of SWI/SNF chromatin remodeling complexes that carry out key enzymatic activities, changing chromatin structure by altering DNA-histone contacts within a nucleosome in an ATP-dependent manner. Component of the CREST-BRG1 complex, a multiprotein complex that regulates promoter activation by orchestrating the calcium-dependent release of a repressor complex and the recruitment of an activator complex. In resting neurons, transcription of the c-FOS promoter is inhibited by SMARCA4-dependent recruitment of a phospho-RB1-HDAC repressor complex. Upon calcium influx, RB1 is dephosphorylated by calcineurin, which leads to release of the repressor complex. At the same time, there is increased recruitment of CREBBP to the promoter by a CREST-dependent mechanism, which leads to transcriptional activation. The CREST-BRG1 complex also binds to the NR2B promoter, and activity-dependent induction of NR2B expression involves the release of HDAC1 and recruitment of CREBBP. Belongs to the neural progenitors-specific chromatin remodeling complex (npBAF complex) and the neuron-specific chromatin remodeling complex (nBAF complex). During neural development, a switch from a stem/progenitor to a postmitotic chromatin remodeling mechanism occurs as neurons exit the cell cycle and become committed to their adult state. The transition from proliferating neural stem/progenitor cells to postmitotic neurons requires a switch in subunit composition of the npBAF and nBAF complexes. As neural progenitors exit mitosis and differentiate into neurons, npBAF complexes which contain ACTL6A/BAF53A and PHF10/BAF45A, are exchanged for homologous alternative ACTL6B/BAF53B and DPF1/BAF45B or DPF3/BAF45C subunits in neuron-specific complexes (nBAF). The npBAF complex is essential for the self-renewal/proliferative capacity of the multipotent neural stem cells. The nBAF complex along with CREST plays a role regulating the activity of genes essential for dendrite growth. SMARCA4/BAF190A may promote neural stem cell self-renewal/proliferation by enhancing Notch-dependent proliferative signals, while concurrently making the neural stem cell insensitive to SHH-dependent differentiating cues (By similarity). Acts as a corepressor of ZEB1 to regulate E-cadherin transcription and is required for induction of epithelial-mesenchymal transition (EMT) by ZEB1. Binds via DLX1 to enhancers located in the intergenic region between DLX5 and DLX6 and this binding is stabilized by the long non-coding RNA (lncRNA) Evf2 (By similarity). Binds to RNA in a promiscuous manner (By similarity). Binding to RNAs including lncRNA Evf2 leads to inhibition of SMARCA4 ATPase and chromatin remodeling activities (By similarity). In brown adipose tissue, involved in the regulation of thermogenic genes expression (By similarity).

Alternative names

Recommended products

Rabbit Recombinant Monoclonal BRG1 antibody. Carrier free. Suitable for ChIC/CUT&RUN-seq, IP, IHC-P, WB, ICC/IF, Flow Cyt (Intra) and reacts with Human, Mouse, Rat samples. Cited in 1 publication.

Key facts

Isotype
IgG
Form
Liquid
Clonality
Monoclonal
Immunogen
  • The exact immunogen used to generate this antibody is proprietary information.
Carrier free
Yes
Clone number
EPR3912
Purification technique
Affinity purification Protein A
Concentration
Loading...

Storage

Shipped at conditions
Blue Ice
Appropriate short-term storage conditions
+4°C
Appropriate long-term storage conditions
+4°C
Storage information
Do Not Freeze

Notes

ab222230 is the carrier-free version of Anti-BRG1 antibody [EPR3912] ab108318.

Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.

This product is a recombinant monoclonal antibody, which offers several advantages including:

  • - High batch-to-batch consistency and reproducibility
  • - Improved sensitivity and specificity
  • - Long-term security of supply
  • - Animal-free batch production

For more information, read more on recombinant antibodies.

Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. The carrier-free buffer and high concentration allow for increased conjugation efficiency.

This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.

Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.

This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.

Product promise

We are dedicated to supporting your work with high quality reagents and we are here for you every step of the way should you need us.

In the unlikely event of one of our products not working as expected, you are covered by our product promise.

Full details and terms and conditions can be found here:
Terms & Conditions.

19 product images

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) analysis of Human bladder cancer tissue sections labeling BRG1 with purified Anti-BRG1 antibody [EPR3912] ab108318 at 1/500 dilution (0.23 μg/ml). Heat mediated antigen retrieval was performed using Antigen Retrieval Buffer (100X Tris-EDTA Buffer, pH 9.0) ab93684 (Tris/EDTA buffer, pH 9.0). ImmunoHistoProbe one step HRP Polymer (ready to use) was used as the secondary antibody. Negative control: PBS instead of the primary antibody. Hematoxylin was used as a counterstain.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    This data was developed using the same antibody clone in a different buffer formulation (Anti-BRG1 antibody [EPR3912] ab108318).

    Lanes 1 - 4: Merged signal (red and green). Red - loading control, ab18058 (unpurified), observed at 124 kDa.

    Anti-BRG1 antibody [EPR3912] ab108318 was shown to specifically react with BRG1 in wild-type HAP1 cells along with additional cross reactive bands. No band was observed when BRG1 knockout samples were used. Wild-type and BRG1 knockout samples were subjected to SDS-PAGE, Anti-BRG1 antibody [EPR3912] ab108318 and ab18058 (loading control to Vinculin) were diluted 1/1000 and 1/10,000 respectively and incubated overnight at 4°C. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed (Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed ab216776) secondary antibodies at 1/10,000 dilution for 1hr at room temperature before imaging.

    All lanes: Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230) at 1/1000 dilution

    Lane 1: Wild-type HAP1 cell lysate at 20 µg

    Lane 2: BRG1 knockout HAP1 cell lysate at 20 µg

    Lane 3: K562 cell lysate at 20 µg

    Lane 4: Molt-4 cell lysate at 20 µg

    Predicted band size: 185 kDa

  • Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Immunocytochemistry/ Immunofluorescence analysis of HeLa (Human cervix adenocarcinoma epithelial cell) cells labeling BRG1 with purified Anti-BRG1 antibody [EPR3912] ab108318 at 1/50 dilution (2.3 μg/ml). Cells were fixed in 4% Paraformaldehyde and permeabilized with 0.1% tritonX-100. Cells were counterstained with Alexa Fluor® 594 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker ab195889 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker (Alexa Fluor® 594) at 1/200 (2.5 μg/ml). Goat anti rabbit IgG (Alexa Fluor® 488, Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) ab150077) was used as the secondary antibody at 1/1000 (2 μg/ml) dilution. DAPI (blue) was used as nuclear counterstain. PBS instead of the primary antibody was used as the secondary antibody only control.
    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    This data was developed using the same antibody clone in a different buffer formulation (Anti-BRG1 antibody [EPR3912] ab108318).

    Lanes 1- 2: Merged signal (red and green). Green - Anti-BRG1 antibody [EPR3912] ab108318 observed at 185 kDa. Red - Anti-Vinculin antibody [VIN-54] observed at 124 kDa.

    Anti-BRG1 antibody [EPR3912] ab108318 was shown to react with BRG1 in wild-type HEK-293T cells in western blot. Loss of signal was observed when knockout cell line Human SMARCA4 (BRG1) knockout HEK-293T cell line ab255432 (knockout cell lysate Human SMARCA4 (BRG1) knockout HEK-293T cell lysate ab263853) was used. Wild-type HEK-293T and SMARCA4 knockout HEK-293T cell lysates were subjected to SDS-PAGE. Membrane was blocked for 1 hour at room temperature in 0.1% TBST with 3% non-fat dried milk. Anti-BRG1 antibody [EPR3912] ab108318 and Anti-Vinculin antibody [VIN-54] overnight at 4°C at a 1 in 10000 dilution and a 1 in 20000 dilution respectively. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye®800CW) preadsorbed (Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed ab216773) and Goat anti-Mouse IgG H&L (IRDye®680RD) preadsorbed (Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed ab216776) secondary antibodies at 1 in 20000 dilution for 1 hour at room temperature before imaging.

    All lanes: Western blot - Anti-BRG1 antibody [EPR3912] (Anti-BRG1 antibody [EPR3912] ab108318) at 1/10000 dilution

    Lane 1: Wild-type HEK-293T cell lysate at 20 µg

    Lane 2: SMARCA4 knockout HEK-293T cell lysate at 20 µg

    Lane 2: Western blot - Human SMARCA4 (BRG1) knockout HEK-293T cell line (Human SMARCA4 (BRG1) knockout HEK-293T cell line ab255432)

    Performed under reducing conditions.

    Predicted band size: 185 kDa

    Observed band size: 185 kDa

  • Flow Cytometry (Intracellular) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Flow Cytometry (Intracellular) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Intracellular Flow Cytometry analysis of HeLa (Human cervix adenocarcinoma epithelial cell) cells labeling BRG1 with purified Anti-BRG1 antibody [EPR3912] ab108318 at 1/20 dilution (10μg/ml) (red). Cells were fixed with 4% Paraformaldehyde and permeabilised with 90% Methanol. A Goat anti rabbit IgG (Alexa Fluor® 488, Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) ab150077) secondary antibody was used at 1/2000. Isotype control - Rabbit monoclonal IgG (Black). Unlabeled control - Cell without incubation with primary antibody and secondary antibody (Blue). This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Western blot - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    This data was developed using Anti-BRG1 antibody [EPR3912] ab108318, the same antibody clone in a different buffer formulation. Different batches of Anti-BRG1 antibody [EPR3912] ab108318 were tested on K-562 (Human chronic myelogenous leukemia lymphoblast) lysate at 0.05 µg/ml. 15 µg of lysate was loaded in each lane. Bands observed at 185 kDa.

    All lanes: Western blot - Anti-BRG1 antibody [EPR3912] (Anti-BRG1 antibody [EPR3912] ab108318)

    Predicted band size: 185 kDa

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) analysis of Rat stomach tissue sections labeling BRG1 with purified Anti-BRG1 antibody [EPR3912] ab108318 at 1:500 dilution (0.23 μg/ml). Heat mediated antigen retrieval was performed using Antigen Retrieval Buffer (100X Tris-EDTA Buffer, pH 9.0) ab93684 (Tris/EDTA buffer, pH 9.0). ImmunoHistoProbe one step HRP Polymer (ready to use) was used as the secondary antibody. Negative control: PBS instead of the primary antibody. Hematoxylin was used as a counterstain.
    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) analysis of Mouse stomach tissue sections labeling BRG1 with purified Anti-BRG1 antibody [EPR3912] ab108318 at 1/500 dilution (0.23 μg/ml). Heat mediated antigen retrieval was performed using Antigen Retrieval Buffer (100X Tris-EDTA Buffer, pH 9.0) ab93684 (Tris/EDTA buffer, pH 9.0). ImmunoHistoProbe one step HRP Polymer (ready to use) was used as the secondary antibody. Negative control: PBS instead of the primary antibody. Hematoxylin was used as a counterstain.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) staining BRG1 in wild-type HAP1 cells (top panel) and BRG1 knockout HAP1 cells (bottom panel). The cells were fixed with 4% formaldehyde (10min), permeabilized with 0.1% Triton X-100 for 5 minutes and then blocked with 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween for 1h. The cells were then incubated with Anti-BRG1 antibody [EPR3912] ab108318 at 1/500 dilution and Alexa Fluor® 594 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker ab195889 at 1/250 dilution (shown in pseudocolour red) overnight at +4°C, followed by a further incubation at room temperature for 1h with a goat secondary antibody to Rabbit IgG (Alexa Fluor® 488) (Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed ab150081) at 2 μg/ml (shown in green). Nuclear DNA was labelled in blue with DAPI.

    Image was taken with a confocal microscope (Leica-Microsystems, TCS SP8).

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) at 1/100 staining BRG1 in paraffin-embedded Human colon tissue.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    Heat mediated antigen retrieval was performed before commencing with IHC staining protocol.

  • Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunocytochemistry/ Immunofluorescence - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) staining BRG1 in HeLa cells. The cells were fixed with 4% formaldehyde (10min), permeabilized with 0.1% Triton X-100 for 5 minutes and then blocked with 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween for 1h. The cells were then incubated with Anti-BRG1 antibody [EPR3912] ab108318 at 1/500 dilution and Alexa Fluor® 594 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker ab195889 at 1/250 dilution (shown in pseudocolour red) overnight at +4°C, followed by a further incubation at room temperature for 1h with a goat secondary antibody to Rabbit IgG (Alexa Fluor® 488) (Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed ab150081) at 2 μg/ml (shown in green). Nuclear DNA was labelled in blue with DAPI.

    Image was taken with a confocal microscope (Leica-Microsystems, TCS SP8).

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) showing positive staining in Urinary bladder transitional carcinoma tissue.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    Heat mediated antigen retrieval was performed before commencing with IHC staining protocol.

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) showing positive staining in Breast carcinoma tissue.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    Heat mediated antigen retrieval was performed before commencing with IHC staining protocol.

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) showing positive staining in Ovarian carcinoma tissue.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    Heat mediated antigen retrieval was performed before commencing with IHC staining protocol.

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    Anti-BRG1 antibody [EPR3912] ab108318 (unpurified) showing positive staining in Normal tonsil tissue.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    Heat mediated antigen retrieval was performed before commencing with IHC staining protocol.

  • Immunoprecipitation - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunoprecipitation - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    BRG1 was immunoprecipitated from NIH/3T3 (mouse embryonic fibroblast), whole cell lysate with Anti-BRG1 antibody [EPR3912] ab108318 at 1/30 dilution (2µg in 0.35mg lysates). Western blot was performed on the immunoprecipitate using Anti-BRG1 antibody [EPR3912] ab108318 at 1/1000 dilution. VeriBlot for IP secondary antibody(HRP)(VeriBlot for IP Detection Reagent (HRP) ab131366) was used as secondary antibody at 1/5000 dilution.

    Lane 1 (Input): NIH/3T3 (mouse embryonic fibroblast), whole cell lysate, 10 μg

    Lane 2 (+) : NIH/3T3 whole cell lysate

    Lane 3 (-) : Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of Anti-BRG1 antibody [EPR3912] ab108318 in NIH/3T3 whole cell lysate

    Blocking and diluting buffer and concentration: 5% NFDM/TBST.

    Observed MW: 185 kDa.

    All lanes: Immunoprecipitation - Anti-BRG1 antibody [EPR3912] (Anti-BRG1 antibody [EPR3912] ab108318) at 1/1000 dilution

    Lane 1: NIH/3T3 (mouse embryonic fibroblast), whole cell lysate at 10 µg

    Lane 2: NIH/3T3 whole cell lysate

    Lane 3: Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of Anti-BRG1 antibody [EPR3912] ab108318 in NIH/3T3 whole cell lysate

    Secondary

    All lanes: Immunoprecipitation - VeriBlot for IP Detection Reagent (HRP) (VeriBlot for IP Detection Reagent (HRP) ab131366) at 1/5000 dilution

    Predicted band size: 185 kDa

    Observed band size: 185 kDa

  • ChIC/CUT&RUN sequencing - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    ChIC/CUT&RUN sequencing - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    ChIC/CUT&RUN was performed using a pAG-MNAse at a final concentration of 700 ng/mL, 2.5 x 10^5 HeLa (Human cervix adenocarcinoma epithelial cell line) cells and 5µg of Anti-BRG1 antibody [EPR3912] ab108318 [EPR3912]. The resulting DNA was sequenced on the Illumina NovaSeq 6000 to a depth of 10 million reads. The negative IgG control Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730 is also shown.

    Additional screenshots of mapped reads can be found in the Protocol booklet in the Support and downloads section.

    The University of Geneva owns patents relevant to ChIC (Chromatin Immuno-Cleavage) methods.

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

  • Immunoprecipitation - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunoprecipitation - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-BRG1 antibody [EPR3912] ab108318).

    BRG1 was immunoprecipitated from K-562 (human chronic myelogenous leukemia lymphoblast), whole cell lysate with Anti-BRG1 antibody [EPR3912] ab108318 at 1/30 dilution (2µg in 0.35mg lysates). Western blot was performed on the immunoprecipitate using Anti-BRG1 antibody [EPR3912] ab108318 at 1/1000 dilution. VeriBlot for IP secondary antibody(HRP)(VeriBlot for IP Detection Reagent (HRP) ab131366) was used as secondary antibody at 1/5000 dilution.

    Lane 1 (Input): K-562 (human chronic myelogenous leukemia lymphoblast), whole cell lysate, 10 μg

    Lane 2 (+) : K-562 whole cell lysate

    Lane 3 (-) : Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of Anti-BRG1 antibody [EPR3912] ab108318 in K-562 whole cell lysate

    Blocking and diluting buffer and concentration: 5% NFDM/TBST.

    Observed MW: 185 kDa.

    All lanes: Immunoprecipitation - Anti-BRG1 antibody [EPR3912] (Anti-BRG1 antibody [EPR3912] ab108318) at 1/1000 dilution

    Lane 1: K-562 (human chronic myelogenous leukemia lymphoblast), whole cell lysate at 10 µg

    Lane 2: K-562 whole cell lysate

    Lane 3: Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of Anti-BRG1 antibody [EPR3912] ab108318 in K-562 whole cell lysate

    Secondary

    All lanes: Immunoprecipitation - VeriBlot for IP Detection Reagent (HRP) (VeriBlot for IP Detection Reagent (HRP) ab131366) at 1/5000 dilution

    Predicted band size: 185 kDa

    Observed band size: 185 kDa

  • Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230), expandable thumbnail

    Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-BRG1 antibody [EPR3912] - BSA and Azide free (ab222230)

    This data was produced using the same antibody clone but in a different formulation containing PBS, sodium azide, glycerol and BSA (Anti-BRG1 antibody [EPR3912] ab108318).

    Immunohistochemical analysis of formalin fixed paraffin embedded human tonsil labelling BRG1 with Anti-BRG1 antibody [EPR3912] ab108318 at a concentration of 4 µg/ml. The immunostaining was performed on a Ventana DISCOVERY ULTRA (Roche Tissue Diagnostics) instrument with a OptiView DAB IHC Detection Kit. Heat mediated antigen retrieval was performed with DISCOVERY cell conditioning solution (CC1) 100°C, pH8.5 for 32mins.

    Anti-BRG1 antibody [EPR3912] ab108318 Anti-BRG1 antibody [EPR3912] was incubated for 16mins at 37°C. Sections were counterstained with Hematoxylin II. Image inset shows absence of staining in secondary antibody only control.

    Customers are encouraged to optimise antigen retrieval conditions, antibody concentration, incubation times and temperature for best results in their own IHC assay workflow (automated and manual)

Downloads

Product protocols

For this product, it's our understanding that no specific protocols are required. You can:

Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.

For licensing inquiries, please contact partnerships@abcam.com