Anti-CD43 antibody [EPR28619-85] - BSA and Azide free
- Advanced Validation
- BOND RX™ Validated
- Recombinant
- RabMAb
- What is this?
Be the first to review this product! Submit a review
|
(0 Publication)
Rabbit Recombinant Monoclonal CD43 antibody. Carrier free. Suitable for ICC/IF, IHC-P, Flow Cyt, mIHC and reacts with Mouse samples.
View Alternative Names
CD43, Leukosialin, B-cell differentiation antigen LP-3, Leukocyte sialoglycoprotein, Lymphocyte antigen 48, Sialophorin, Ly-48
- mIHC
Lab
Multiplex immunohistochemistry - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Multiplex immunohistochemistry analysis of formalin/PFA-fixed paraffin-embedded mouse colon tissue staining Glycam1 with ab324912 at a 1/4000 ( 0.126 μg/ml) dilution, ab317313 anti-CD43 used at 1/500 dilution (1.052 μg/ml) and ab272692 anti-MUC2 used at 1/2000 dilution (0.26 μg/ml).
Panel A : anti-Glycam1 (green; Opal™520), anti-CD43 (magenta; Opal™690), anti-MUC2 (gray; Opal™570) on mouse colon.
Panel B : anti-Glycam1 staining HEV (highly endothelial venules) in mouse colon.
Panel C : anti-CD43 staining T lymphocytes in mouse colon.
Panel D : anti-MUC2 staining goblet cells in mouse colon.
Nuclear DNA was labeled with DAPI (shown in blue).
The section was incubated in three rounds of staining : in the order of ab324912, ab237721 and ab315346 for 30 mins at room temperature. Each round was followed by a separate fluorescent tyramide signal amplification system.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument with an Opal™ 4-color kit. Image acquisition was performed with Leica SP8 confocal microscope.
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Mouse skeletal muscle tissue labeling CD43 with ab317313 at 1/500 (1.052 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Negative control : No staining on mouse skeletal muscle.
The section was incubated with ab317313 for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- ICC/IF
Supplier Data
Immunocytochemistry/ Immunofluorescence - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Immunofluorescent analysis of 4% Paraformaldehyde-fixed, 0.1% Tween-20 permeabilized mouse splenocyte cells labelling CD43 with ab317313 at 1/50 (10.52 ug/ml) dilution, followed by ab150081 Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed antibody at 1/1000 (2 ug/ml) dilution (Green).
Confocal image showing membranous staining in subset of mouse splenocyte (shown in green), which is not co-localised with CD11b (shown in magenta). Nuclear DNA was labeled with DAPI (shown in blue).
Image was taken with a confocal microscope(Leica-Microsystems, TCS SP8).
ab8878 Anti-CD11b Rat monoclonal antibody was used to counterstain at 1/200 (2.5ug/ml) dilution (Magenta). The Nuclear counterstain was DAPI (Blue).
Secondary antibody only control : Secondary antibody is ab150081 Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed at 1/1000 (2 ug/ml) dilution.
- Flow Cyt
Supplier Data
Flow Cytometry - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Flow cytometric analysis of Mouse spleen cell cells labelling CD43 with ab317313 at 1/500 dilution (0.1ug)/right compared with a Rabbit monoclonal IgG (ab172730) / Left isotype control.
Goat Anti-Rabbit IgG (Alexa Fluor® 488, ab150081) at 1/5000 dilution was used as the secondary antibody.
Cells were co-stained with anti-CD4 conjugated to Alexa Fluor®647.
Gated on viable cells.
- Flow Cyt
Supplier Data
Flow Cytometry - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Flow cytometric analysis of mouse spleen cell cells labelling CD43 with ab317313 at 1/500 dilution (0.1ug)/right compared with a Rabbit monoclonal IgG (ab172730) / Left isotype control.
Goat Anti-Rabbit IgG (Alexa Fluor® 488, ab150081) at 1/5000 dilution was used as the secondary antibody.
Cells were co-stained with anti-CD11b conjugated to Brilliant Violet 510.
Gated on viable cells.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded (A) EL4 (mouse lymphoma T lymphocyte). (B) C2C12 (mouse myoblast). tissue labeling CD43 with ab317313 at 1/100 (5.26 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Positive staining on (A) EL4, no staining on (B) C2C12.
The section was incubated with ab317313 for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Mouse lung tissue labeling CD43 with ab317313 at 1/500 (1.052 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Positive staining on immune cells of mouse lung.
The section was incubated with ab317313 for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-CD43 antibody [EPR28619-85] - BSA and Azide free (AB317314)
This data was developed using ab317313, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Mouse spleen tissue labeling CD43 with ab317313 at 1/500 (1.052 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Positive staining on T cells of mouse spleen.
The section was incubated with ab317313 for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
Related conjugates and formulations (4)
-
Anti-CD43 antibody [EPR28619-85]
-
519 Alexa Fluor® 488
Alexa Fluor® 488 Anti-CD43 antibody [EPR28619-85]
-
665 Alexa Fluor® 647
Alexa Fluor® 647 Anti-CD43 antibody [EPR28619-85]
-
578 PE
PE Anti-CD43 antibody [EPR28619-85]
Reactivity data
Product details
ab317314 is the carrirer-free version of ab317313.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com