Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free
- BOND RX™ Validated
- KO Validated
- RabMAb
- Recombinant
- What is this?
5
(1 Review)
|
(6 Publications)
Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (ab208696) is a rabbit recombinant monoclonal antibody provided in a PBS only buffer for easy conjugation detecting Cyclin E1 in Western Blot, Flow Cytometry (Intra), IP, IHC-P, ICC/IF. Suitable for Human.
- KO validated for confirmed specificity
- BSA, sodium azide, and glycerol-free for easy conjugation
- Biophysical QC for unrivalled batch-batch consistency
View Alternative Names
CCNE, CCNE1, G1/S-specific cyclin-E1
- IHC-P
Lab
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911). Immunohistochemical analysis of paraffin-embedded (A) Wild-type HAP1 (human chronic myelogenous leukemia near-haploid cell) cell pellets (B)CCNE1 KO HAP1 cell pellets tissue labeling Cyclin E1 with ab33911 at 1/2000 (0.12 μg/ml) dilution followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection). Nuclear staining on (A) Wild-type HAP1 cell pellets, no staining on (B) CCNE1 KO HAP1 cell pellets.The section was incubated with ab33911 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin. Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection). Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- ICC/IF
Unknown
Immunocytochemistry/ Immunofluorescence - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Immunocytochemistry/Immunofluorescence analysis of HeLa (human cervix adenocarcinoma) cells labeling Cyclin E1 (green) with purified ab33911 at 1/500. Cells were fixed with 4% paraformaldehyde and permeabilized with 0.1% Triton X-100. ab150077, Alexa Fluor® 488-conjugated goat anti-rabbit IgG (1/1000) was used as the secondary antibody. Nuclei were counterstained with DAPI (blue).
Secondary Only Control : PBS was used instead of the primary antibody as the negative control.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911).
- IHC-P
Lab
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911). Immunohistochemical analysis of paraffin-embedded Human colon carcinoma tissue labeling Cyclin E1 with ab33911 at 1/2000 (0.12 μg/ml) dilution followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection). Nuclear staining on the human colon carcinoma. The section was incubated with ab33911 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin. Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection). Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- IHC-P
Lab
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911). Immunohistochemical analysis of paraffin-embedded Human placenta tissue labeling Cyclin E1 with ab33911 at 1/2000 (0.12 μg/ml) dilution followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection). Nuclear staining on the human placenta. The section was incubated with ab33911 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with Hematoxylin. Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection). Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- ICC/IF
AbReview42932****
Immunocytochemistry/ Immunofluorescence - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
ab33911 staining Cyclin E1 in HeLa cells by ICC/IF (Immunocytochemistry/immunofluorescence). Cells were fixed with paraformaldehyde, permeabilized with 0.2% Triton X-100 and blocked with 2% BSA for 45 minutes at room temperature. Samples were incubated with primary antibody (1/300 in PBS + 2% BSA) for 14 hours at 4°C. An Alexa Fluor® 488-conjugated goat anti-rabbit IgG polyclonal (1/500) was used as the secondary antibody.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911) (unpurified).
This image is courtesy of an anonymous Abreview.
- ICC/IF
AbReview57481****
Immunocytochemistry/ Immunofluorescence - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Immunocytochemistry/Immunofluorescence analysis of HeLa cells labeling Cyclin E1 with ab33911 at 1/500 dilution. Cells were fixed in paraformaldehyde and permeabilized with 0.5% Triton X-100 in PBS. Staining with ab33911 at 1/500 was carried out for 1 hour at 22°C in PBS buffer. ab150081, a Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) preadsorbed secondary antibody, was used at 1/200 dilution. DAPI was used to counterstain.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911) (unpurified).
This image is courtesy of an Abreview submitted by Kirk McManus.
- Flow Cyt (Intra)
Unknown
Flow Cytometry (Intracellular) - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Intracellular Flow Cytometry analysis of HeLa (Human cervix adenocarcinoma epithelial cell) cells labeling Cyclin E1 with Purified ab33911 at 1/30 dilution (10 μg/mL) (Red). Cells were fixed with 4% Paraformaldehyde and permeabilised with 90% Methanol. A Goat anti rabbit IgG (Alexa Fluor® 488, ab150077) secondary antibody was used at 1/2000. Isotype control - Rabbit monoclonal IgG (Black). Unlabeled control - Cell without incubation with primary antibody and secondary antibody (Blue). This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911).
- Flow Cyt (Intra)
Unknown
Flow Cytometry (Intracellular) - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Overlay histogram showing MCF7 cells stained with ab33911 (red line). The cells were fixed with 4% paraformaldehyde (10 min) and then permeabilized with 0.1% PBS-Tween for 20 min. The cells were then incubated in 1x PBS / 10% normal goat serum / 0.3M glycine to block non-specific protein-protein interactions followed by the antibody (ab33911, 1/1000 dilution) for 30 min at 22°C. The secondary antibody used was Alexa Fluor® 488 goat anti-rabbit IgG (H&L) (ab150077) at 1/2000 dilution for 30 min at 22°C. Isotype control antibody (black line) was rabbit IgG (monoclonal) (0.1μg/1x106 cells) used under the same conditions. Unlabelled sample (blue line) was also used as a control. Acquisition of >5,000 events were collected using a 20mW Argon ion laser (488nm) and 525/30 bandpass filter. This antibody gave a positive signal in MCF7 cells fixed with 80% methanol (5 min)/permeabilized with 0.1% PBS-Tween for 20 min used under the same conditions.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911) (unpurified).
- IP
Unknown
Immunoprecipitation - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Purified ab33911 at 1/30 dilution (2ug) immunoprecipitating Cyclin E1 in HeLa whole cell lysate.
Lane 1 (input) : HeLa (Human cervix adenocarcinoma epithelial cell) whole cell lysate (10μg)
Lane 2 (+) : ab33911 + HeLa whole cell lysate.
Lane 3 (-) : Rabbit monoclonal IgG (ab172730) instead of ab33911 in HeLa whole cell lysate.
VeriBlot for IP Detection Reagent (HRP) (ab131366) (1/1000) was used for Western blotting.
Blocking Buffer and concentration : 5% NFDM/TBST.
Diluting buffer and concentration : 5% NFDM/TBST.
Observed band size : 50 kDa
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911).
All lanes:
Immunoprecipitation - Anti-Cyclin E1 antibody [EP435E] (<a href='/en-us/products/primary-antibodies/cyclin-e1-antibody-ep435e-ab33911'>ab33911</a>)
Predicted band size: 47 kDa
false
- WB
Lab
Western blot - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
This data was developed using the same antibody clone in a different buffer formulation (ab33911).
Western blot : Anti-CCNE1 antibody [EPR26497-64] (ab33911) staining at 1/1000 dilution, shown in green; Mouse anti-GAPDH antibody [6C5] (ab8245) loading control staining at 1/20000 dilution, shown in magenta. In Western blot, ab33911 was shown to bind specifically to CCNE1. A band was observed at 45 kDa in wild-type HCT 116 cell lysates with no signal observed at this size in CCNE1 knockout cell line. To generate this image, wild-type and CCNE1 knockout HCT 116 cell lysates were analysed. First, samples were run on an SDS-PAGE gel then transferred onto a nitrocellulose membrane. Membranes were blocked in 3 % milk in TBS-0.1 % Tween® 20 (TBS-T) before incubation with primary antibodies overnight at 4 °C. Blots were washed four times in TBS-T, incubated with secondary antibodies for 1 h at room temperature, washed again four times then imaged. Secondary antibodies used were Goat anti-Rabbit IgG H&L 800CW and Goat anti-Mouse IgG H&L 680RD at 1/20000 dilution.
All lanes:
Western blot - Anti-Cyclin E1 antibody [EP435E] (<a href='/en-us/products/primary-antibodies/cyclin-e1-antibody-ep435e-ab33911'>ab33911</a>) at 1/1000 dilution
Lane 1:
Wild-type HCT 116 cell lysate at 20 µg
Lane 2:
CCNE1 knockout HCT 116 cell lysate at 20 µg
Lane 3:
Wild-type MCF7 ab288560 cell lysate at 20 µg
Lane 4:
CCNE1 knockout MCF7 <a href='/en-us/products/cell-lines/human-ccne1-knockout-mcf7-cell-line-ab286303'>ab286303</a> cell lysate at 20 µg
Secondary
All lanes:
Goat anti-Rabbit IgG H&L 800CW and Goat anti-Mouse IgG H&L 680RD at 1/20000 dilution
Predicted band size: 47 kDa
Observed band size: 45 kDa
false
- WB
Lab
Western blot - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Lanes 1 - 2 : Merged signal (red and green). Green - ab33911 observed at 47 kDa. Red - loading control, ab9484, observed at 37 kDa.
ab33911 was shown to recognize CCNE1 in wild-type HAP1 cells as signal was lost at the expected MW in CCNE1 (Cyclin E1) knockout cells. Additional cross-reactive bands were observed in the wild-type and knockout cells. Wild-type and CCNE1 (Cyclin E1) knockout samples were subjected to SDS-PAGE. ab33911 and ab9484 (Mouse anti-GAPDH loading control) were incubated overnight at 4°C at 1/1000 dilution and 1/20000 dilution respectively. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preabsorbed ab216773 and Goat anti-Mouse IgG H&L (IRDye® 680RD) preabsorbed ab216776 secondary antibodies at 1/20000 dilution for 1 hour at room temperature before imaging.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911) (unpurified).
All lanes:
Western blot - Anti-Cyclin E1 antibody [EP435E] (<a href='/en-us/products/primary-antibodies/cyclin-e1-antibody-ep435e-ab33911'>ab33911</a>) at 1/1000 dilution
Lane 1:
Wild-type HAP1 whole cell lysate at 40 µg
Lane 2:
CCNE1 (Cyclin E1) knockout HAP1 whole cell lysate at 40 µg
Predicted band size: 47 kDa
false
- WB
Unknown
Western blot - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
Cyclin E1 is highly expressed in testis and placenta which is described in PMID : 9840943.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911).
All lanes:
Western blot - Anti-Cyclin E1 antibody [EP435E] (<a href='/en-us/products/primary-antibodies/cyclin-e1-antibody-ep435e-ab33911'>ab33911</a>) at 1/1000 dilution
Lane 1:
HeLa (Human cervix adenocarcinoma epithelial cell) whole cell lysates at 20 µg
Lane 2:
Human testis lysates at 20 µg
Lane 3:
Human placenta lysates at 20 µg
Secondary
All lanes:
Goat Anti-Rabbit IgG (HRP) with minimal cross-reactivity with human IgG at 1/2000 dilution
Predicted band size: 47 kDa
Observed band size: 50 kDa
false
- WB
Lab
Western blot - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab33911).
All lanes:
Western blot - Anti-Cyclin E1 antibody [EP435E] (<a href='/en-us/products/primary-antibodies/cyclin-e1-antibody-ep435e-ab33911'>ab33911</a>) at 1/1000 dilution
Lane 1:
Wild-type MCF7 cell lysate at 20 µg
Lane 2:
CCNE1 knockout MCF7 cell lysate at 20 µg
Lane 3:
HT-29 cell lysate at 20 µg
Lane 4:
PC-3 cell lysate at 20 µg
Observed band size: 47 kDa
true
- WB
Lab
Western blot - Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (AB208696)
False colour image of Western blot : Anti-Cyclin E1 antibody [EP435E] staining at 1/1000 dilution, shown in green; Mouse anti-GAPDH antibody [6C5] (ab8245) loading control staining at 1/20000 dilution, shown in red. In Western blot, ab33911 was shown to bind specifically to Cyclin E1. A band was observed at 47 kDa in wild-type HAP1 cell lysates with no signal observed at this size in CCNE1 knockout cell line. To generate this image, wild-type and CCNE1 knockout HAP1 cell lysates were analysed. First, samples were run on an SDS-PAGE gel then transferred onto a nitrocellulose membrane. Membranes were blocked in 3 % milk in TBS-0.1 % Tween® 20 (TBS-T) before incubation with primary antibodies overnight at 4 °C. Blots were washed four times in TBS-T, incubated with secondary antibodies for 1 h at room temperature, washed again four times then imaged. Secondary antibodies used were Goat anti-Rabbit IgG H&L (IRDye® 800CW) preabsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preabsorbed (ab216776) at 1/20000 dilution.
All lanes:
Western blot - Anti-Cyclin E1 antibody [EP435E] (<a href='/en-us/products/primary-antibodies/cyclin-e1-antibody-ep435e-ab33911'>ab33911</a>) at 1/1000 dilution
Lane 1:
Wild-type HAP1 cell lysate at 20 µg
Lane 2:
CCNE1 knockout HAP1 cell lysate at 20 µg
Lane 3:
Jurkat cell lysate at 20 µg
Predicted band size: 47 kDa
Observed band size: 47 kDa
false
Related conjugates and formulations (2)
-
Anti-Cyclin E1 antibody [EP435E]
-
665 Alexa Fluor® 647
Alexa Fluor® 647 Anti-Cyclin E1 antibody [EP435E]
Reactivity data
Product details
What is this antibody validated in?
Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (ab208696) is a rabbit recombinant monoclonal antibody and is validated for use in Western Blot (WB), Flow Cytometry (Intra), Flow Cytometry (Flow Cyt), Immunoprecipitation (IP), Immunohistochemistry (IHC-P), Immunocytochemistry/immunofluorescence (ICC/IF) in Human samples.
What is the molecular weight of Cyclin E1?
Anti-Cyclin E1 [EP435E] - BSA and Azide free (ab208696) specifically detects a band for Cyclin E1 (UniProt: P24864) at a molecular weight of 47kDa.
Trial sizes available!
Test your antibody or perform pre-screening before committing to a larger quantity. Sold in 10µl. Discover our selection of trial-size antibodies.
Specificity confirmed
The specificity of Anti-Cyclin E1 antibody [EP435E] - BSA and Azide free (ab208696) has been confirmed by Western blot testing in CCNE1 Knockout HAP1 cells.
Other related products
We have a range of other formats of antibody clone [EP435E] also available for your convenience: ab33911, Alexa Fluor® 647 - ab194069, HRP - ab194070, Carrier free - ab208696
Species reactivity
Mouse, Rat: We have preliminary internal testing data to indicate this antibody may not react with these species.
Please contact us for more information.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Storage information
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Publications (6)
Recent publications for all applications. Explore the full list and refine your search
Nature 642:785-795 PubMed40399682
2025
Applications
Unspecified application
Species
Unspecified reactive species
Journal of assisted reproduction and genetics 38:2641-2650 PubMed34718923
2021
Applications
Unspecified application
Species
Unspecified reactive species
Cancer research 74:5808-18 PubMed25320178
2014
Applications
Unspecified application
Species
Unspecified reactive species
International journal of oncology 45:2311-24 PubMed25215935
2014
Applications
Unspecified application
Species
Unspecified reactive species
Biochemical and biophysical research communications 443:1078-84 PubMed24370822
2013
Applications
WB
Species
Human
Experimental biology and medicine (Maywood, N.J.) 236:1322-32 PubMed21969712
2011
Applications
Unspecified application
Species
Unspecified reactive species
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com