Rabbit Recombinant Monoclonal FHL1 antibody. Suitable for IP, WB, ICC/IF, IHC-P and reacts with Mouse, Human, Rat samples. Cited in 4 publications.
IgG
Rabbit
pH: 7.2 - 7.4
Preservative: 0.01% Sodium azide
Constituents: PBS, 40% Glycerol (glycerin, glycerine), 0.05% BSA
Liquid
Monoclonal
IP | Flow Cyt | WB | ICC/IF | IHC-P | |
---|---|---|---|---|---|
Human | Tested | Not recommended | Tested | Tested | Tested |
Mouse | Tested | Not recommended | Tested | Expected | Tested |
Rat | Expected | Not recommended | Tested | Expected | Tested |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info 1/30 | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Human | Dilution info 1/30 | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species | Dilution info | Notes |
---|---|---|
Species Rat | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human | Dilution info - | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Mouse | Dilution info - | Notes - |
Species Rat | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info 1/1000 | Notes - |
Species Rat | Dilution info 1/1000 | Notes - |
Species Human | Dilution info 1/1000 | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human | Dilution info 1/50 | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Rat | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info 1/500 | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Rat | Dilution info 1/500 | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Human | Dilution info 1/500 | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Select an associated product type
May have an involvement in muscle development or hypertrophy.
Four and a half LIM domains protein 1, FHL-1, Skeletal muscle LIM-protein 1, SLIM, SLIM-1, SLIM1, FHL1
Rabbit Recombinant Monoclonal FHL1 antibody. Suitable for IP, WB, ICC/IF, IHC-P and reacts with Mouse, Human, Rat samples. Cited in 4 publications.
Four and a half LIM domains protein 1, FHL-1, Skeletal muscle LIM-protein 1, SLIM, SLIM-1, SLIM1, FHL1
IgG
Rabbit
pH: 7.2 - 7.4
Preservative: 0.01% Sodium azide
Constituents: PBS, 40% Glycerol (glycerin, glycerine), 0.05% BSA
Liquid
Monoclonal
EPR22842-95
Affinity purification Protein A
Blue Ice
1-2 weeks
+4°C
-20°C
Upon delivery aliquot
Avoid freeze / thaw cycle
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
This product is a recombinant monoclonal antibody, which offers several advantages including:
For more information, read more on recombinant antibodies.
The FHL1 protein also known as Four and a Half LIM Domains 1 operates mechanically as a multifunctional adaptor protein. Its molecular mass is approximately 35 kDa. This protein is widely expressed in skeletal muscle and heart tissues playing a role in various cellular contexts. FHL1 interacts within the cell cytoplasm and nucleus allowing it to assist in multiple cellular processes.
FHL1 integrates into diverse cellular mechanisms by engaging in protein-protein interactions. It acts as part of complexes that regulate transcription cell differentiation and development. The involvement of FHL1 in muscle growth and maintenance is significant partly due to its expression pattern. In skeletal muscles it helps adapt muscle response to mechanical stress while in cardiac tissue it participates in muscle contractility and integrity.
FHL1 plays important roles in both the muscle differentiation pathway and the MAPK/ERK signaling pathway. It influences the transcriptional regulation essential for muscle cell growth and differentiation. FHL1 interacts with proteins such as MyoD during muscle formation and MEF2 in the MAPK/ERK pathway modulating cellular responses to external signals and stressors.
FHL1's involvement is evident in conditions such as Emery-Dreifuss muscular dystrophy and cardiomyopathy. Mutations or dysregulation of this protein can impair muscle function leading to myopathy. It associates with other proteins like emerin in genetic disorders affecting muscle tissues and structural integrity revealing its vital role in maintaining muscular health.
We have tested this species and application combination and it works. It is covered by our product promise.
We have not tested this specific species and application combination in-house, but expect it will work. It is covered by our product promise.
This species and application combination has not been tested, but we predict it will work based on strong homology. However, this combination is not covered by our product promise.
We do not recommend this combination. It is not covered by our product promise.
We are dedicated to supporting your work with high quality reagents and we are here for you every step of the way should you need us.
In the unlikely event of one of our products not working as expected, you are covered by our product promise.
Full details and terms and conditions can be found here:
Terms & Conditions.
Lanes 1-4: Merged signal (red and green). Green - ab255828 observed at 32 kDa. Red - loading control Anti-alpha Tubulin antibody [DM1A] - Loading Control ab7291 observed at 50 kDa.
ab255828 Anti-FHL1 antibody [EPR22842-95] was shown to specifically react with FHL1 in wild-type HeLa cells. Loss of signal was observed when knockout cell line Human FHL1 knockout HeLa cell line ab266011 (knockout cell lysate Human FHL1 knockout HeLa cell lysate ab257952) was used. Wild-type and FHL1 knockout samples were subjected to SDS-PAGE. ab255828 and Anti-alpha Tubulin antibody [DM1A] - Loading Control (Anti-alpha Tubulin antibody [DM1A] - Loading Control ab7291) were incubated overnight at 4°C at 1 in 1000 dilution and 1 in 20000 dilution respectively. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed (Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed ab216776) secondary antibodies at 1 in 20000 dilution for 1 hour at room temperature before imaging.
All lanes: Western blot - Anti-FHL1 antibody [EPR22842-95] (ab255828) at 1/1000 dilution
Lane 1: Wild-type HeLa cell lysate at 20 µg
Lane 2: FHL1 knockout HeLa cell lysate at 20 µg
Lane 3: HEK293T cell lysate at 20 µg
Lane 4: Daudi cell lysate at 20 µg
All lanes: Western blot - Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed ab216773) at 1/10000 dilution
Predicted band size: 36 kDa
Observed band size: 32 kDa
This data was developed using ab255828, the same antibody clone in a different buffer formulation.
Lanes 1-4: Merged signal (red and green). Green - ab255828 observed at 32 kDa. Red - loading control Anti-alpha Tubulin antibody [DM1A] - Loading Control ab7291 observed at 50 kDa.
ab255828 Anti-FHL1 antibody [EPR22842-95] was shown to specifically react with FHL1 in wild-type HeLa cells. Loss of signal was observed when knockout cell line Human FHL1 knockout HeLa cell line ab266011 (knockout cell lysate Human FHL1 knockout HeLa cell lysate ab257952) was used. Wild-type and FHL1 knockout samples were subjected to SDS-PAGE. ab255828 and Anti-alpha Tubulin antibody [DM1A] - Loading Control (Anti-alpha Tubulin antibody [DM1A] - Loading Control ab7291) were incubated overnight at 4°C at 1 in 1000 dilution and 1 in 20000 dilution respectively. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed (Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed ab216776) secondary antibodies at 1 in 20000 dilution for 1 hour at room temperature before imaging.
Immunohistochemical analysis of paraffin-embedded human colon tissue labeling FHL1 with ab255828 at 1/500 dilution (1.036 μg/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101). Positive staining on the stroma and smooth muscle in human colon is observed. The section was incubated with ab255828 for 30 mins at RT. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with hematoxylin.
Secondary antibody only control: Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
FHL1 was immunoprecipitated from 0.35 mg mouse skeletal muscle lysate 10μg with ab255828 at 1/30 dilution (2μg in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab255828 at 1/1000 dilution. VeriBlot for IP Detection Reagent (HRP) (VeriBlot for IP Detection Reagent (HRP) ab131366) was used at 1/5000 dilution.
Lane 1: Mouse skeletal muscle lysate 10μg.
Lane 2: ab255828 IP in mouse skeletal muscle lysate.
Lane 3: Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of ab255828 in mouse skeletal muscle lysate.
Blocking and dilution buffer and concentration/ 5% NFDM/TBST.
Exposure time/ 30 seconds.
All lanes: Immunoprecipitation - Anti-FHL1 antibody [EPR22842-95] (ab255828)
Predicted band size: 36 kDa
Immunofluorescent analysis of 4% Paraformaldehyde-fixed, 0.1% TritonX-100 permeabilized NCI-H1299 (Human lung carcinoma epithelial cell) cells labeling FHL1 with ab255828 at 1/50 10 μg/ml dilution, followed by Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) ab150077 AlexaFluor®488 Goat anti-Rabbit secondary antibody at 1/1000 2 μg/ml dilution (Green). Confocal image showing cytoplasmic and nuclear staining in NCI-H1299 cell line. Low expression control: NCI-H460 cell line (PMID: 21702045). Alexa Fluor® 594 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker ab195889 Anti-alpha Tubulin antibody [DM1A] - Microtubule Marker (Alexa Fluor® 594) was used to counterstain tubulin at 1/200 dilution (Red). The nuclear counterstain was DAPI (Blue).
Secondary antibody only control: Secondary antibody is AlexaFluor®488 Goat anti-Rabbit secondary at 1/1000 2 μg/ml dilution.
FHL1 was immunoprecipitated from 0.35 mg human lung lysate 10μg with ab255828 at 1/30 dilution (2μg in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab255828 at 1/1000 dilution. VeriBlot for IP Detection Reagent (HRP) (VeriBlot for IP Detection Reagent (HRP) ab131366) was used at 1/5000 dilution.
Lane 1: Human lung lysate 10μg.
Lane 2: ab255828 IP in human lung lysate.
Lane 3: Rabbit monoclonal IgG (Rabbit IgG, monoclonal [EPR25A] - Isotype Control ab172730) instead of ab255828 in human lung lysate.
Blocking and dilution buffer and concentration: 5% NFDM/TBST.
Exposure time/ 30 seconds.
All lanes: Immunoprecipitation - Anti-FHL1 antibody [EPR22842-95] (ab255828)
Predicted band size: 36 kDa
There are five isoforms of FHL1. The expression profile/ molecular weight observed is consistent with what has been described in the literature (PMID: 21702045).
Low expression control: NCI-H460 (PMID: 21702045).
Blocking/Diluting buffer and concentration: 5% NFDM/TBST.
Exposure Time:
Lanes 1-2: 3 minutes;
Lane 3: 26 seconds;
Lane 4: 1 second;
Lane 5: 26 seconds.
All lanes: Western blot - Anti-FHL1 antibody [EPR22842-95] (ab255828) at 1/1000 dilution
Lane 1: NCI-H1299 (human lung carcinoma epithelial cell) whole cell lysate at 20 µg
Lane 2: NCI-H460 (human large cell lung cancer epithelial cell) whole cell lysate at 20 µg
Lane 3: Mouse skeletal muscle lysate at 20 µg
Lane 4: Human skeletal muscle lysate at 20 µg
Lane 5: Human lung lysate at 20 µg
Lanes 1 - 3: Western blot - Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/100000 dilution
Lanes 4 - 5: Western blot - VeriBlot for IP Detection Reagent (HRP) (VeriBlot for IP Detection Reagent (HRP) ab131366) at 1/1000 dilution
Predicted band size: 36 kDa
Observed band size: 32 kDa
There are five isoforms of FHL1. The expression profile/ molecular weight observed is consistent with what has been described in the literature (PMID: 21702045).
Blocking/Diluting buffer and concentration: 5% NFDM/TBST.
Exposure Time:
Lanes 1-3: 3 minutes;
Lane 4: 3 seconds.
All lanes: Western blot - Anti-FHL1 antibody [EPR22842-95] (ab255828) at 1/1000 dilution
Lane 1: Mouse kidney lysate at 10 µg
Lane 2: Mouse spleen lysate at 10 µg
Lane 3: Rat heart lysate at 10 µg
Lane 4: Rat skeletal muscle lysate at 10 µg
All lanes: Western blot - Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/100000 dilution
Predicted band size: 36 kDa
Observed band size: 32 kDa
Immunohistochemical analysis of paraffin-embedded rat skeletal muscle tissue labeling FHL1 with ab255828 at 1/500 dilution (1.036 μg/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101). Cytoplasmic staining on rat skeletal muscle (PMID: 27443559, 9714789) is observed. The section was incubated with ab255828 for 30 mins at RT. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with hematoxylin.
Secondary antibody only control: Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
Immunohistochemical analysis of paraffin-embedded mouse lung tissue labeling FHL1 with ab255828 at 1/500 dilution (1.036 μg/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101). Cytoplasmic staining on mouse lung (PMID: 29067108) is observed. The section was incubated with ab255828 for 30 mins at RT. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with hematoxylin.
Secondary antibody only control: Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
Immunohistochemical analysis of paraffin-embedded human cardiac muscle tissue labeling FHL1 with ab255828 at 1/500 dilution (1.036 μg/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101). Cytoplasmic staining on human cardiac muscle (PMID: 9714789) is observed. The section was incubated with ab255828 for 30 mins at RT. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with hematoxylin.
Secondary antibody only control: Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
Immunohistochemical analysis of paraffin-embedded human skeletal muscle tissue labeling FHL1 with ab255828 at 1/500 dilution (1.036 μg/ml) followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101). Cytoplasmic staining on human skeletal muscle (PMID: 27443559, 9714789) is observed. The section was incubated with ab255828 for 30 mins at RT. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counterstained with hematoxylin.
Secondary antibody only control: Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (Rabbit specific IHC polymer detection kit HRP/DAB ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution 2) for 20 mins.
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com