Rabbit Recombinant Monoclonal H3 antibody. Carrier free. Suitable for PepArr, WB, ICC/IF, Flow Cyt (Intra), IHC-P and reacts with Synthetic peptide, Mouse, Rat, Human samples.
pH: 7.2 - 7.4
Constituents: PBS
IP | PepArr | ChIP | WB | ICC/IF | Flow Cyt (Intra) | IHC-P | |
---|---|---|---|---|---|---|---|
Human | Not recommended | Expected | Not recommended | Tested | Tested | Tested | Tested |
Mouse | Not recommended | Expected | Not recommended | Tested | Expected | Expected | Tested |
Rat | Not recommended | Expected | Not recommended | Tested | Expected | Expected | Expected |
Synthetic peptide | Not recommended | Tested | Not recommended | Not recommended | Not recommended | Not recommended | Not recommended |
Species | Dilution info | Notes |
---|---|---|
Species Human, Mouse, Rat, Synthetic peptide | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Synthetic peptide | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Rat, Human | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse | Dilution info - | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Rat | Dilution info - | Notes - |
Species Human | Dilution info - | Notes - |
Species Synthetic peptide | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Rat, Human | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Synthetic peptide | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Rat | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Synthetic peptide | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human | Dilution info - | Notes ab199376 - Rabbit monoclonal IgG, is suitable for use as an isotype control with this antibody. |
Species | Dilution info | Notes |
---|---|---|
Species Mouse, Rat | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Synthetic peptide | Dilution info - | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Human | Dilution info - | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species Mouse | Dilution info - | Notes Perform heat-mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
Species | Dilution info | Notes |
---|---|---|
Species Rat | Dilution info Use at an assay dependent concentration. | Notes - |
Species | Dilution info | Notes |
---|---|---|
Species Synthetic peptide | Dilution info - | Notes - |
Select an associated product type
Core component of nucleosome. Nucleosomes wrap and compact DNA into chromatin, limiting DNA accessibility to the cellular machineries which require DNA as a template. Histones thereby play a central role in transcription regulation, DNA repair, DNA replication and chromosomal stability. DNA accessibility is regulated via a complex set of post-translational modifications of histones, also called histone code, and nucleosome remodeling.
H3FA, HIST1H3A, H3C2, H3FL, HIST1H3B, H3C3, H3FC HIST1H3C, H3C4, H3FB, HIST1H3D, H3C6, H3FD, HIST1H3E, H3C7, H3FI, HIST1H3F, H3C8, H3FH, HIST1H3G, H3C10, H3FK, HIST1H3H, H3C11, H3FF, HIST1H3I, H3C12, H3FJ, HIST1H3J, HIST1H3C, H3FC, H3C1, Histone H3.1, Histone H3/a, Histone H3/b, Histone H3/c, Histone H3/d, Histone H3/f, Histone H3/h, Histone H3/i, Histone H3/j, Histone H3/k, Histone H3/l
Rabbit Recombinant Monoclonal H3 antibody. Carrier free. Suitable for PepArr, WB, ICC/IF, Flow Cyt (Intra), IHC-P and reacts with Synthetic peptide, Mouse, Rat, Human samples.
pH: 7.2 - 7.4
Constituents: PBS
ab240361 is the carrier-free version of Anti-Histone H3 antibody [EPR17785] ab201456.
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
This product is a recombinant monoclonal antibody, which offers several advantages including:
For more information, read more on recombinant antibodies.
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. The carrier-free buffer and high concentration allow for increased conjugation efficiency.
This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
We have tested this species and application combination and it works. It is covered by our product promise.
We have not tested this specific species and application combination in-house, but expect it will work. It is covered by our product promise.
This species and application combination has not been tested, but we predict it will work based on strong homology. However, this combination is not covered by our product promise.
We do not recommend this combination. It is not covered by our product promise.
We are dedicated to supporting your work with high quality reagents and we are here for you every step of the way should you need us.
In the unlikely event of one of our products not working as expected, you are covered by our product promise.
Full details and terms and conditions can be found here:
Terms & Conditions.
Immunohistochemical analysis of paraffin-embedded Human cervix carcinoma tissue labeling Histone H3 with Anti-Histone H3 antibody [EPR17785] ab201456 at 1/200 dilution, followed by Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) secondary antibody at 1/500 dilution.
Nuclear staining on Human cervix carcinoma tissue is observed.
Counter stained with Hematoxylin.
Secondary antibody only control: Used PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
Perform heat mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
Immunohistochemical analysis of paraffin-embedded Human kidney tissue labeling Histone H3 with Anti-Histone H3 antibody [EPR17785] ab201456 at 1/200 dilution, followed by Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) secondary antibody at 1/500 dilution.
Nuclear staining on Human kidney tissue is observed.
Counter stained with Hematoxylin.
Secondary antibody only control: Used PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
Perform heat mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
Immunohistochemical analysis of paraffin-embedded Mouse colon tissue labeling Histone H3 with Anti-Histone H3 antibody [EPR17785] ab201456 at 1/200 dilution, followed by Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) secondary antibody at 1/500 dilution.
Nuclear staining on mouse colon tissue is observed.
Counter stained with Hematoxylin.
Secondary antibody only control: Used PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
Perform heat mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
Immunohistochemical analysis of paraffin-embedded Rat stomach tissue labeling Histone H3 with Anti-Histone H3 antibody [EPR17785] ab201456 at 1/200 dilution, followed by Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) secondary antibody at 1/500 dilution.
Nuclear staining on rat stomach tissue is observed.
Counter stained with Hematoxylin.
Secondary antibody only control: Used PBS instead of primary antibody, secondary antibody is Goat Anti-Rabbit IgG H&L (HRP) (Goat Anti-Rabbit IgG H&L (HRP) ab97051) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
Perform heat mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
Immunofluorescent analysis of 4% paraformaldehyde-fixed, 0.1% Triton-X100 permeabilized HeLa (Human epithelial cells from cervix adenocarcinoma) cells labeling Histone H3 with Anti-Histone H3 antibody [EPR17785] ab201456 at 1/800 dilution, followed by AlexaFluor®488 Goat anti-Rabbit secondary antibody (Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) ab150077) at 1/500 dilution (green).
Confocal image showing nuclear staining on HeLa cell line.
The nuclear counter stain is DAPI (blue).
Tubulin is stained with Anti-alpha Tubulin antibody [DM1A] - Loading Control ab7291 anti-Tubulin (mouse mAb) at 1/1000 dilution, followed by AlexaFluor®594 Goat anti-Mouse secondary antibody (Goat Anti-Mouse IgG H&L (Alexa Fluor® 594) preadsorbed ab150120) at 1/500 dilution (red).
-ve control 1: Anti-Histone H3 antibody [EPR17785] ab201456 at 1/800 dilution followed by AlexaFluor®594 Goat anti-Mouse secondary antibody (Goat Anti-Mouse IgG H&L (Alexa Fluor® 594) preadsorbed ab150120) at 1/500 dilution.
-ve control 2: Anti-alpha Tubulin antibody [DM1A] - Loading Control ab7291 anti-Tubulin (mouse mAb) at 1/1000 dilution, followed by AlexaFluor®488 Goat anti-Rabbit secondary antibody (Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) ab150077) at 1/500 dilution.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
Intracellular flow cytometric analysis of 2% paraformaldehyde-fixed HeLa (Human epithelial cells from cervix adenocarcinoma) cells labeling Histone H3 with Anti-Histone H3 antibody [EPR17785] ab201456 at 1/100 dilution (red) compared with a rabbit monoclonal IgG isotype control (black) and an unlabelled control (cells without incubation with primary antibody and secondary antibody; blue). Goat anti rabbit IgG (FITC) at 1/150 dilution was used as the secondary antibody.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (Anti-Histone H3 antibody [EPR17785] ab201456).
Peptide array analysis of Anti-Histone H3 antibody [EPR17785] ab201456 at 1/10000 (0.02 ug/ml) dilution followed by a Goat Anti-Rabbit IgG, (H+L), Fluo 647nm conjugated at 1/50000 dilution.
Blocking buffer: 5% BSA in TBST.
Anti-Histone H3 antibody [EPR17785] ab201456 was tested in Peptide Array against 501 different modified and unmodified histone peptides; each peptide is printed on the array at six concentrations (each in triplicate).
Circle area represents affinity between the antibody and a peptide: all antigen-containing peptides are displayed as red circles, all other peptides as blue circles. The affinity is calculated as the area under the curve when antibody binding values are plotted against the corresponding peptide concentration. Each circle area is normalized to the peptide with the strongest affinity.
The complete dataset, including a full list of all peptides and information on the position of each peptide in the diagram, can be downloaded here.
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com