Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free
- BOND RX™ Validated
- RabMAb
- Advanced Validation
- Recombinant
- What is this?
Be the first to review this product! Submit a review
|
(1 Publication)
Rabbit Recombinant Monoclonal H3 phospho S28 antibody. Carrier free. Suitable for PepArr, IHC-P, IP, ChIP, Dot, WB, ICC/IF, Flow Cyt (Intra) and reacts with Synthetic peptide, Human, Mouse samples. Cited in 1 publication.
View Alternative Names
H3FT, HIST3H3, H3-4, Histone H3.1t, H3/t, H3t, H3/g, Histone H3.4, H3S28p
- IHC-P
Unknown
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
IHC image of ab32388 staining Histone H3 in Human normal colon formalin fixed paraffin embedded tissue* sections, performed on a Leica Bond. The section was pre-treated using heat mediated antigen retrieval with sodium citrate buffer (pH6, epitope retrieval solution 1) for 20 mins. The section was then incubated with ab32388, 0.1ug/ml, for 15 mins at room temperature and detected using an HRP conjugated compact polymer system. DAB was used as the chromogen. The section was then counterstained with haematoxylin and mounted with DPX. No primary antibody was used in the negative control (shown on the inset).
For other IHC staining systems (automated and non-automated) customers should optimize variable parameters such as antigen retrieval conditions, primary antibody concentration and antibody incubation times.
*Tissue obtained from the Human Research Tissue Bank, supported by the NIHR Cambridge Biomedical Research Centre
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- Flow Cyt (Intra)
Lab
Flow Cytometry (Intracellular) - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Overlay histogram showing HeLa cells stained with ab32388 (red line). The cells were fixed with 4% paraformaldehyde and then permeabilized with 90% methanol. The cells were then incubated in 1x PBS / 10% normal goat serum / 0.3M glycine to block non-specific protein-protein interactions followed by the antibody (ab32388, 1/1200 dilution, 1.02 μg/ml) for 30 min at 22°C. The secondary antibody used was Alexa Fluor® 488 goat anti-rabbit IgG (H+L) (ab150077) at 1/2000 dilution for 30 min at 22°C. Isotype control antibody (black line) was rabbit IgG (monoclonal) (ab172730) (1μg/1x106 cells) used under the same conditions. Unlabelled sample (blue line) was also used as a control. Acquisition of >5,000 events were collected using a 20mW Argon ion laser (488nm) and 525/30 bandpass filter.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- Flow Cyt (Intra)
Unknown
Flow Cytometry (Intracellular) - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Overlay histogram showing HeLa cells stained with ab32388 (red line). The cells were fixed with 80% methanol (5 min) and then permeabilized with 0.1% PBS-Tween for 20 min. The cells were then incubated in 1x PBS / 10% normal goat serum / 0.3M glycine to block non-specific protein-protein interactions followed by the antibody (ab32388, 1/100 dilution) for 30 min at 22°C. The secondary antibody used was Alexa Fluor® 488 goat anti-rabbit IgG (H+L) (ab150077) at 1/2000 dilution for 30 min at 22°C. Isotype control antibody (black line) was rabbit IgG (monoclonal) (1μg/1x106 cells) used under the same conditions. Unlabelled sample (blue line) was also used as a control. Acquisition of >5,000 events were collected using a 20mW Argon ion laser (488nm) and 525/30 bandpass filter. This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- ICC/IF
Unknown
Immunocytochemistry/ Immunofluorescence - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Immunofluorescent analysis of 4% Paraformaldehyde-fixed, 0.1% tritonX-100 permeabilized HeLa (Human epithelial cell line from cervix adenocarcinoma) cells, LP starved and non-starved, labeling anti-Histone H3 (phospho S28) with ab32388 at 1/100 dilution followed by Goat anti-Rabbit secondary IgG AlexaFluor®488 (ab150077) secondary antibody at 1/1000 dilution (green).
Confocal image showing nuclear staining on M phase of HeLa cells, then the signal decreased after LP treatment.
For the pan antibody, there was no great difference after LP treatment. The data showed mostly nuclear staining
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- ChIP
Unknown
ChIP - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Chromatin was prepared from HeLa cells according to the Abcam X-ChIP protocol. Cells were fixed with formaldehyde for 10min.
The ChIP was performed with 25 µg of chromatin, 5 µg of ab32388 (red), and 20 µl of Protein A/G sepharose beads. No antibody was added to the beads control (gray). The immunoprecipitated DNA was quantified by real time PCR (Sybr green approach).
Primers and probes are located in the first kb of the transcribed region.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- IP
Lab
Immunoprecipitation - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Western blot was performed on the immunoprecipitate using ab32388 at 1 : 500 dilution (2.444 μg/ml). VeriBlot for IP secondary antibody (HRP) (ab131366) at 1 : 1000 dilution.
Blocking/Diluting buffer and concentration : 5% NFDM/TBST.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
All lanes:
Immunoprecipitation - Anti-Histone H3 (phospho S28) antibody [E191] - ChIP Grade (<a href='/en-us/products/primary-antibodies/histone-h3-phospho-s28-antibody-e191-chip-grade-ab32388'>ab32388</a>)
Lane 1:
HeLa (human cervix adenocarcinoma epithelial cell) treated with 0.5µM Nocodazole for 24h whole cell lysate at 10 µg
Lane 2:
<a href='/en-us/products/primary-antibodies/histone-h3-phospho-s28-antibody-e191-chip-grade-ab32388'>ab32388</a> IP in Nocodazole treated HeLa whole cell lysate
Lane 3:
Rabbit monoclonal IgG (<a href='/en-us/products/primary-antibodies/rabbit-igg-monoclonal-epr25a-isotype-control-ab172730'>ab172730</a>) instead of <a href='/en-us/products/primary-antibodies/histone-h3-phospho-s28-antibody-e191-chip-grade-ab32388'>ab32388</a> in nocodazole treated HeLa whole cell lysate
Predicted band size: 15 kDa
Observed band size: 17 kDa
false
- Dot
Lab
Dot Blot - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Dot blot analysis of Histone H3 (phospho S28) labeled with ab32388 at 1/1000 dilution. Lane 1 : Histone H3 (phospho S28) peptide a Lane 2 : Histone H3 (phospho S28) peptide c1 Goat Anti-Rabbit IgG, (H+L), Peroxidase conjugated (ab97051) was used as secondary antobody at 1/100000 dilution. Blocking/Dilution buffer : 5% NFDM/TBST. Exposure time : 180 minutes. This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- Dot
Unknown
Dot Blot - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
Dot blot performed using ab32388 at a dilution of 1/100. Lane 1 - Unmodified H3 peptide. Lane 2 - H3S28ph peptide. Lane 3 - H3.3S28ph peptide. Lane 4 - H3.3S31ph peptide. A HRP conjugated goat anti-rabbit (H+L) was used as the secondary antibody at a dilution of 1/2500. The exposure time was 3 minutes and the dilution and blocking buffer used were 5% NFDM/TBST.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
- PepArr
Lab
Peptide Array - Anti-Histone H3 (phospho S28) antibody [E191] - BSA and Azide free (AB215532)
ab32388 (0.02μg/mL) was tested in Peptide Array against 501 different modified and unmodified histone peptides; each peptide is printed on the array at six concentrations (each in triplicate). A Goat Anti-Rabbit IgG, (H+L), Fluo 647nm conjugated at 1/50000 was used as the secondary antibody. Protein Array Washing Buffer, 2*10 mins and 2*5 mins. Blocking buffer was 5% BSA in TBST and Innoscan 710 scanner was used. Circle area represents affinity between the antibody and a peptide : all antigen-containing peptides are displayed as red circles, all other peptides as blue circles. The affinity is calculated as the area under the curve when antibody binding values are plotted against the corresponding peptide concentration. Each circle area is normalized to the peptide with the strongest affinity. This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab32388).
Reactivity data
Product details
ab215532 is the carrier-free version of ab32388.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Storage information
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Publications (1)
Recent publications for all applications. Explore the full list and refine your search
BMC veterinary research 21:11 PubMed39789573
2025
Applications
Unspecified application
Species
Unspecified reactive species
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com