Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free
- BOND RX™ Validated
- RabMAb
- Recombinant
- KO Validated
- What is this?
Be the first to review this product! Submit a review
|
(0 Publication)
Rabbit Recombinant Monoclonal KMT2D / MLL2 antibody. Carrier free. Suitable for IP, IHC-P, WB and reacts with Human samples.
View Alternative Names
ALR, MLL2, MLL4, KMT2D, Histone-lysine N-methyltransferase 2D, Lysine N-methyltransferase 2D, ALL1-related protein, Myeloid/lymphoid or mixed-lineage leukemia protein 2
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free (AB325958)
This data was developed using ab324486, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded A : Wild-type HAP1 (human chronic myelogenous leukemia near-haploid cell) cell pellet. B : KMT2D knockout HAP1 cell pellet tissue labeling KMT2D / MLL2 with ab324486 at 1/2000 (0.254 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Positive staining on A : Wild-type HAP1 cell pellet, no staining on B : KMT2D knockout HAP1 cell pellet. The primary antibody was incubated for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free (AB325958)
This data was developed using ab324486, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Human diffuse large B-cell lymphoma tissue labeling KMT2D / MLL2 with ab324486 at 1/1000 (0.508 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Positive staining on human diffuse large B-cell lymphoma (PMID : 26366712). The primary antibody was incubated for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free (AB325958)
This data was developed using ab324486, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Human stomach tissue labeling KMT2D / MLL2 with ab324486 at 1/1000 (0.508 ug/ml) dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Positive staining on human stomach. The primary antibody was incubated for 30 mins at room temperature.
The immunostaining was performed on a Leica Biosystems BOND® RX instrument
Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection).
Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins
- IP
Supplier Data
Immunoprecipitation - Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free (AB325958)
This data was developed using ab324486, the same antibody clone in a different buffer formulation.
KMT2D / MLL2 was immunoprecipitated from 0.35 mg Wild-type HAP1 (human chronic myelogenous leukemia near-haploid cell) whole cell lysate with ab324486 at 1/30 dilution (2ug in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab324486 at 1/1000 dilution.
Blocking and dilution buffer and concentration : 5% NFDM/TBST
To minimize protein degradation cells were lysed immediately after harvest and then applied for Immunoprecipitation as soon as possible.
All lanes:
Immunoprecipitation - Anti-KMT2D / MLL2 antibody [EPR29598-577] (<a href='/en-us/products/primary-antibodies/kmt2d-mll2-antibody-epr29598-577-ab324486'>ab324486</a>) at 1/1000 dilution
Lane 1:
Wild-type HAP1 (human chronic myelogenous leukemia near-haploid cell) whole cell lysate at 10 µg
Lane 2:
<a href='/en-us/products/primary-antibodies/kmt2d-mll2-antibody-epr29598-577-ab324486'>ab324486</a> IP in Wild-type HAP1 (human chronic myelogenous leukemia near-haploid cell) whole cell lysate
Lane 3:
Rabbit monoclonal IgG (<a href='/en-us/products/primary-antibodies/rabbit-igg-monoclonal-epr25a-isotype-control-ab172730'>ab172730</a>) instead of <a href='/en-us/products/primary-antibodies/kmt2d-mll2-antibody-epr29598-577-ab324486'>ab324486</a> in Wild-type HAP1 whole cell lysate
Secondary
All lanes:
Immunoprecipitation - VeriBlot for IP Detection Reagent (HRP) (<a href='/en-us/products/reagents/veriblot-for-ip-detection-reagent-hrp-ab131366'>ab131366</a>) at 1/5000 dilution
Observed band size: 593 kDa
false
Exposure time: 76s
- WB
Supplier Data
Western blot - Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free (AB325958)
This data was developed using ab324486, the same antibody clone in a different buffer formulation.
Blocking and diluting buffer and concentration : 5% NFDM/TBST.
To minimize protein degradation cells were lysed immediately after harvest and then applied to a gel and transfer membrane for Western blotting as soon as possible.
Exposure time : Lane 1 : 26 seconds; Lane 2 : 37 seconds; Lane 3 : 92 seconds; Lane 4 : 103 seconds.
All lanes:
Western blot - Anti-KMT2D / MLL2 antibody [EPR29598-577] (<a href='/en-us/products/primary-antibodies/kmt2d-mll2-antibody-epr29598-577-ab324486'>ab324486</a>) at 1/1000 dilution
Lane 1:
HepG2 (human hepatocellular carcinoma epithelial cell) whole cell lysate at 20 µg
Lane 2:
K-562 (human chronic myelogenous leukemia lymphoblast) whole cell lysate at 20 µg
Lane 3:
HCT 116 (human colorectal carcinoma epithelial cell) whole cell lysate at 20 µg
Lane 4:
MCF7 (human breast adenocarcinoma epithelial cell) whole cell lysate at 20 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Observed band size: 593 kDa
false
- WB
Supplier Data
Western blot - Anti-KMT2D / MLL2 antibody [EPR29598-577] - BSA and Azide free (AB325958)
This data was developed using ab324486, the same antibody clone in a different buffer formulation.
Blocking and diluting buffer and concentration : 5% NFDM/TBST.
In Western blot ab324486 was shown to bind specifically to KMT2D. Target of interest was observed at 593 kDa in wild-type HAP1 cell lysates (lane 1) with no signal observed at this size in KMT2D knockout cell line (lane 2).
To minimize protein degradation cells were lysed immediately after harvest and then applied to a gel and transfer membrane for Western blotting as soon as possible.
In Western blot Anti-Vinculin antibody [EPR8185] (ab129002) staining at 1/10000 dilution.
All lanes:
Western blot - Anti-KMT2D / MLL2 antibody [EPR29598-577] (<a href='/en-us/products/primary-antibodies/kmt2d-mll2-antibody-epr29598-577-ab324486'>ab324486</a>) at 1/1000 dilution
Lane 1:
Wild-type HAP1 (human chronic myelogenous leukemia near-haploid cell) whole cell lysate at 40 µg
Lane 2:
KMT2D knockout HAP1 whole cell lysate at 40 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Observed band size: 593 kDa,124 kDa
false
Exposure time: 26s
Reactivity data
Product details
ab325958 is the carrier-free version of ab324486
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Storage information
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com