Anti-Mark3 antibody [EPR633Y] - BSA and Azide free
- RabMAb
- Recombinant
- KO Validated
- What is this?
Be the first to review this product! Submit a review
|
(0 Publication)
Rabbit Recombinant Monoclonal MARK3 antibody. Carrier free. Suitable for ICC/IF, IP, WB, Flow Cyt (Intra) and reacts with Human, Mouse samples.
View Alternative Names
CTAK1, EMK2, MARK3, MAP/microtubule affinity-regulating kinase 3, C-TAK1, Cdc25C-associated protein kinase 1, ELKL motif kinase 2, Protein kinase STK10, Ser/Thr protein kinase PAR-1, Serine/threonine-protein kinase p78, cTAK1, EMK-2, Par-1a
- Flow Cyt (Intra)
Unknown
Flow Cytometry (Intracellular) - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
Overlay histogram showing HeLa cells stained with unpurified ab52626 (red line). The cells were fixed with 80% methanol (5 min) and then permeabilized with 0.1% PBS-Tween for 20 min. The cells were then incubated in 1x PBS / 10% normal goat serum / 0.3M glycine to block non-specific protein-protein interactions followed by the antibody (unpurified ab52626, 1/1000 dilution) for 30 min at 22°C. The secondary antibody used was Alexa Fluor® 488 goat anti-rabbit IgG (H+L) (ab150077) at 1/2000 dilution for 30 min at 22°C. Isotype control antibody (black line) was rabbit IgG (monoclonal) (1μg/1x106 cells) used under the same conditions. Unlabelled sample (blue line) was also used as a control. Acquisition of >5,000 events were collected using a 20mW Argon ion laser (488nm) and 525/30 bandpass filter.
- Flow Cyt (Intra)
Unknown
Flow Cytometry (Intracellular) - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
Intracellular Flow Cytometry analysis of HeLa cells labelling Mark3 with purified ab52626 at a dilution of 1/50 (red). Cells were fixed with 4% paraformaldehyde. An Alexa Fluor® 488-conjugated goat anti-rabbit IgG (1/500) was used as the secondary antibody. Black - Isotype control, rabbit monoclonal IgG. Blue - Unlabelled control, cells without incubation with primary and secondary antibodies.
- ICC/IF
Unknown
Immunocytochemistry/ Immunofluorescence - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
Immunocytochemistry/Immunofluorescence analysis of MCF-7 cells labelling Mark3 with purified ab52626 at a dilution of 1/100. Cells were fixed with 4% paraformaldehyde and permeabilized with 0.1% Triton X-100. ab150077, an Alexa Fluor® 488-conjugated goat anti-rabbit IgG (1/1000) was used as the secondary antibody. DAPI (blue) was used as the nuclear counterstain. ab7291, a mouse anti-tubulin (1/1000) and ab150120, an Alexa Fluor® 594-conjugated goat anti-mouse IgG (1/1000) were also used.
Control 1 : primary antibody (1/100) and secondary antibody, ab150120, an Alexa Fluor® 594-conjugated goat anti-mouse IgG (1/1000).
Control 2 : ab7291 (1/1000) and secondary antibody, ab150077, an Alexa Fluor® 488-conjugated goat anti-rabbit IgG (1/1000).
- IP
Lab
Immunoprecipitation - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626&
44; the same antibody clone in a different buffer formulation.
ab52626 (purified) at a dilution of 1/20 immunoprecipitating Mark3 in K562 whole cell lysate.
Lane 1 (input) : K562 whole cell lysate (10μg).
Lane 2 (+) : ab52626 + K562 whole cell lysate.
Lane 3 (-) : Rabbit monoclonal IgG (ab172730) instead of ab52626 in K562 whole cell lysate.
For western blotting, ab131366 VeriBlot for IP (HRP) was used for detection (1/1000). Blocking and dilution buffer : 5% NFDM/TBST.
All lanes:
Immunoprecipitation - Anti-Mark3 antibody [EPR633Y] (<a href='/en-us/products/primary-antibodies/mark3-antibody-epr633y-ab52626'>ab52626</a>)
Predicted band size: 87 kDa
Observed band size: 86 kDa
false
- WB
Lab
Western blot - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
Blocking and dilution buffer : 5% NFDM/TBST.
All lanes:
Western blot - Anti-Mark3 antibody [EPR633Y] (<a href='/en-us/products/primary-antibodies/mark3-antibody-epr633y-ab52626'>ab52626</a>) at 1/2000 dilution
Lane 1:
K562 whole cell lysate at 20 µg
Lane 2:
HeLa whole cell lysate at 20 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Predicted band size: 87 kDa
Observed band size: 86 kDa
false
- WB
Lab
Western blot - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
Lane 1 : Wild-type HAP1 cell lysate (40 μg)
Lane 2 : MARK3 knockout HAP1 cell lysate (40 μg)
Lane 3 : HeLa cell lysate (20 μg)
Lane 4 : K562 cell lysate (20 μg)
Lanes 1 - 4 : Merged signal (red and green). Green - ab52626 observed at 85 kDa. Red - loading control, ab8245, observed at 37 kDa.
ab52626 was shown to recognize Mark3 when Mark3 knockout samples were used, along with additional cross-reactive bands. Wild-type and Mark3 knockout samples were subjected to SDS-PAGE. ab52626 and ab8245 (loading control to GAPDH) were diluted at 1/1000 and 1 : 10,000 dilution respectively and incubated overnight at 4°C. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed (ab216776) secondary antibodies at 1 : 10,000 dilution for 1 hour at room temperature before imaging.
All lanes:
Western blot - Anti-Mark3 antibody [EPR633Y] (<a href='/en-us/products/primary-antibodies/mark3-antibody-epr633y-ab52626'>ab52626</a>)
Predicted band size: 87 kDa
false
- WB
Lab
Western blot - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
Blocking and dilution buffer : 5% NFDM/TBST.
All lanes:
Western blot - Anti-Mark3 antibody [EPR633Y] (<a href='/en-us/products/primary-antibodies/mark3-antibody-epr633y-ab52626'>ab52626</a>) at 10 µg
All lanes:
NIH/3T3 whole cell lysate at 10 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Predicted band size: 87 kDa
Observed band size: 86 kDa
false
- WB
Unknown
Western blot - Anti-Mark3 antibody [EPR633Y] - BSA and Azide free (AB247326)
This data was developed using ab52626, the same antibody clone in a different buffer formulation.
All lanes:
Western blot - Anti-Mark3 antibody [EPR633Y] (<a href='/en-us/products/primary-antibodies/mark3-antibody-epr633y-ab52626'>ab52626</a>) at 1/2000 dilution
All lanes:
HeLa cell lysate at 10 µg
Secondary
All lanes:
HRP-conjugated goat anti-rabbit IgG at 1/2000 dilution
Predicted band size: 87 kDa
Observed band size: 86 kDa
false
Related conjugates and formulations (1)
-
Anti-Mark3 antibody [EPR633Y]
Reactivity data
Product details
ab247326 is the carrier-free version of ab52626.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Species reactivity
Rat: We have preliminary internal testing data to indicate this antibody may not react with this species.
Please contact us for more information.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Storage information
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com