Anti-MCP1 antibody [EPR21025] - BSA and Azide free
- BOND RX™ Validated
- RabMAb
- Recombinant
- KO Validated
- What is this?
Be the first to review this product! Submit a review
|
(1 Publication)
Knockout Tested Rabbit Recombinant Monoclonal MCP1 antibody. Carrier free. Suitable for ICC/IF, IP, WB, IHC-P, Flow Cyt (Intra) and reacts with Human samples. Cited in 1 publication.
View Alternative Names
MCP1, SCYA2, CCL2, C-C motif chemokine 2, HC11, Monocyte chemoattractant protein 1, Monocyte chemotactic and activating factor, Monocyte chemotactic protein 1, Monocyte secretory protein JE, Small-inducible cytokine A2, MCAF, MCP-1
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
Immunohistochemical analysis of paraffin-embedded human lung adenocarcinoma sections labelling MCP1 with ab214819 at a 1/2000 dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection) secondary antibody. Counter stained with Hematoxylin.
Positive staining on human lung adenocarcinoma. The section was incubated with ab214819 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
This data was developed using ab214819, the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
Immunohistochemical analysis of paraffin-embedded wild-type HeLa cell pellets and CCL2 knockout HeLa cell pellets labelling MCP1 with ab214819 at a 1/10000 dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection) secondary antibody. Counter stained with Hematoxylin.
Image A : Wild-type Hela cell pellets treated with Brefeldin A (1μg/ml) for 3 hours.
Image B : Wild-type Hela cell pellets treated with TNF-alpha (TNFα, 20ng/ml) for 3 hours, 1µg/ml Brefeldin A was added for additional 3 hours.
Image C : CCL2 knockout HeLa cell pellets treated with Brefeldin A (1μg/ml) for 3 hours.
Image D : CCL2 knockout HeLa cell pellets treated with TNF-alpha (TNFα, 20ng/ml) for 3 hours, 1µg/ml Brefeldin A was added for additional 3 hours.
Positive staining on wild-type HeLa cell pellets treated with Brefeldin A (1μg/ml) for 3 hours (Image A) and wild-type HeLa cell pellets treated with TNF-alpha (TNFα, 20ng/ml) for 3 hours, 1µg/ml Brefeldin A was added for additional 3 hours (Image B); No staining on CCL2 knockout HeLa cell pellets treated with Brefeldin A (1μg/ml) for 3 hours (Image C) and CCL2 knockout HeLa cell pellets treated with TNF-alpha (TNFα, 20ng/ml) for 3 hours, 1µg/ml Brefeldin A was added for additional 3 hours (Image D). The section was incubated with ab214819 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
This data was developed using ab214819, the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide.
- ICC
Lab
Immunocytochemistry - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
This data was developed using the same antibody clone in a different buffer formulation (ab214819).
ab214819 staining MCP1 in wild-type and MCP1 knockout HeLa cells (ab255372), untreated or treated with TNF-alpha (20ng/mL, 6 hours) and Brefeldin A (1μg/ml, 3 hours). The cells were fixed with 100% methanol (5 min) then permeabilized with 0.1% Triton X-100 for 5 minutes and then blocked with 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween for 1h. The cells were then incubated with ab214819 at 1μg/ml concentration and ab7291 (Mouse monoclonal to alpha Tubulin) at 1/1000 dilution overnight at 4°C followed by a further incubation at room temperature for 1h with a goat secondary antibody to rabbit IgG (Alexa Fluor® 488) (ab150081) at 2 μg/ml (shown in green) and a goat secondary antibody to mouse IgG (Alexa Fluor® 594) (ab150120) at 2 μg/ml (shown in red). Nuclear DNA was labelled in blue with DAPI.
Image was taken with a confocal microscope (Leica-Microsystems TCS SP8).
- Flow Cyt
Lab
Flow Cytometry - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
Intracellular flow cytometric analysis of 4% paraformaldehyde-fixed, 0.1% Tween-20-permeabilized THP-1 (human monocytic leukemia cell line) cell line, treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24h, then treated with 100ng/ml lipopolysaccharide (LPS) for 4h, then together with 1μg/ml Brefeldin A (BFA) for another 3h (Right) / Untreated control (Left)labeling MCP1 with ab214891 at 1/500 dilution. Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) (ab150077) at 1/2000 dilution was used as the secondary antibody.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab214819).
- ICC/IF
Lab
Immunocytochemistry/ Immunofluorescence - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
Immunofluorescent analysis of 4% paraformaldehyde-fixed, 0.1% Triton X-100 permeabilized THP-1 (human monocytic leukemia cell line) cells, untreated or treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24 hours, then treated with 100ng/ml lipopolysaccharide (LPS) for 7 hours, with 1 μg/ml Brefeldin A (BFA) added after 4 hours, labeling MCP1 with ab214819 at 1/50 dilution followed by Goat Anti-Rabbit IgG H&L (Alexa Fluor® 488) (ab150077) secondary antibody at 1/1000 dilution (green). Confocal image showing cytoplasmic staining in THP-1 treated cells.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab214819).
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
Immunohistochemical analysis of paraffin-embedded THP-1 (human monocytic leukemia monocyte) cell pellets labelling MCP1 with ab214819 at a 1/10000 dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection) secondary antibody. Counter stained with Hematoxylin.
Image A : THP-1 (human monocytic leukemia monocyte) cell pellets treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24 hours, then added 100ng/ml Lipopolysaccharides (LPS) for 7 hours, 1µg/ml Brefeldin A was added for additional 3 hours.
Image B : Untreated THP-1 cell pellets.
Cytoplasmic staining on THP-1 cell pellets treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24 hours, then added 100ng/ml Lipopolysaccharides (LPS) for 7 hours, 1µg/ml Brefeldin A was added for additional 3 hours (Image A); No staining on untreated THP-1 cell pellets (Image B). The section was incubated with ab214819 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
This data was developed using ab214819, the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide.
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
Immunohistochemical analysis of paraffin-embedded human skeletal muscle sections labelling MCP1 with ab214819 at a 1/10000 dilution, followed by a ready to use LeicaDS9800 (Bond™ Polymer Refine Detection) secondary antibody. Counter stained with Hematoxylin.
Negative control : no staining on human skeletal muscle.
The section was incubated with ab214819 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Heat mediated antigen retrieval was performed with Tris-EDTA buffer (pH 9.0, Epitope Retrieval Solution2) for 20 mins.
This data was developed using ab214819, the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide.
- IP
Supplier Data
Immunoprecipitation - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
MCP1 was immunoprecipitated from 0.35 mg of THP-1 (human monocytic leukemia cell line) treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24h, then treated with 100ng/ml lipopolysaccharide (LPS) for 4h, then together with 1μg/ml Brefeldin A (BFA) for another 3h whole cell lysate with ab214819 at 1/30 dilution. Western blot was performed from the immunoprecipitate using ab214819 at 1/1000 dilution. VeriBlot for IP Detection Reagent (HRP) (ab131366), was used for detection at 1/1000 dilution.
Lane 1 : THP-1 treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24h, then treated with 100ng/ml lipopolysaccharide (LPS) for 4h, then together with 1μg/ml Brefeldin A (BFA) for another 3h whole cell lysate 10 μg (Input).
Lane 2 : ab214819 IP in THP-1 treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24h, then treated with 100ng/ml lipopolysaccharide (LPS) for 4h, then together with 1μg/ml Brefeldin A (BFA) for another 3h whole cell lysate.
Lane 3 : Rabbit monoclonal IgG (ab172730) instead of ab214819 in THP-1 treated with 80nM Phorbol-12-myristate-13-acetate (PMA) for 24h, then treated with 100ng/ml lipopolysaccharide (LPS) for 4h, then together with 1μg/ml Brefeldin A (BFA) for another 3h whole cell lysate.
Blocking and dilution buffer and concentration : 5% NFDM/TBST.
Exposure time : 30 seconds.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab214819).
All lanes:
Immunoprecipitation - Anti-MCP1 antibody [EPR21025] (<a href='/en-us/products/primary-antibodies/mcp1-antibody-epr21025-ab214819'>ab214819</a>)
Predicted band size: 11 kDa,14 kDa
Observed band size: 12 kDa
false
Exposure time: 30s
- WB
Lab
Western blot - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
This data was developed using the same antibody clone in a different buffer formulation (ab214819). Anti-CCL2 antibody [EPR21025] (ab214819) staining at 1/400 dilution, shown in green; Mouse anti-GAPDH antibody [6C5] (ab8245) loading control staining at 1/20000 dilution, shown in red. In Western blot, ab214819 was shown to bind specifically to CCL2. A band was observed at 13 kDa in wild-type A549 cell lysates with no signal observed at this size in CCL2 knockout cell line ab270478 (knockout cell lysate ab270501). To generate this image, wild-type and CCL2 knockout A549 cell lysates were analysed. First, samples were run on an SDS-PAGE gel then transferred onto a nitrocellulose membrane. Membranes were blocked in 5 % milk in TBS-0.1 % Tween$®$ 20 (TBS-T) before incubation with primary antibodies overnight at 4 °C. Blots were washed four times in TBS-T, incubated with secondary antibodies for 1 h at room temperature, washed again four times then imaged. Secondary antibodies used were Goat anti-Rabbit IgG H&L 800CW at 1/20000 dilution and Goat anti-Mouse IgG H&L 680RD at 1/80000 dilution
All lanes:
Western blot - Anti-MCP1 antibody [EPR21025] (<a href='/en-us/products/primary-antibodies/mcp1-antibody-epr21025-ab214819'>ab214819</a>)
Lane 1:
Wild-type A549 cell lysate at 20 µg
Lane 2:
Wild-type A549 Treated BFA (1 ug/mL, 3 h) cell lysate, at 20 µg
Lane 3:
CCL2 knockout A549 Treated BFA (1 ug/mL, 3 h) cell lysate at 20 µg
Observed band size: 13 kDa
false
- WB
Lab
Western blot - Anti-MCP1 antibody [EPR21025] - BSA and Azide free (AB242013)
False colour image of Western blot : Anti-MCP1 antibody [EPR21025] staining at 1/1000 dilution, shown in green; Mouse anti-Alpha Tubulin [DM1A] (ab7291) loading control staining at 1/20000 dilution, shown in red. In Western blot, ab214819 was shown to bind specifically to MCP1. A band was observed at 11 kDa in wild-type cell lysates with no signal observed at this size in ccl2 knockout cell line ab255372 (knockout cell lysate ab263807). To generate this image, wild-type and ccl2 knockout cell lysates were analysed. First, samples were run on an SDS-PAGE gel then transferred onto a nitrocellulose membrane. Membranes were blocked in fluorescent western blot (TBS-based) blocking solution before incubation with primary antibodies overnight at 4 °C. Blots were washed four times in TBS-T, incubated with secondary antibodies for 1 h at room temperature, washed again four times then imaged.Secondary antibodies used were Goat anti-Rabbit IgG H&L (IRDye® 800CW) preabsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preabsorbed (ab216776) at 1/20000 dilution.
All lanes:
Western blot - Anti-MCP1 antibody [EPR21025] (<a href='/en-us/products/primary-antibodies/mcp1-antibody-epr21025-ab214819'>ab214819</a>) at 1/1000 dilution
Lane 1:
Wild-type HeLa Vehicle Control TNF alpha (0ng/mL, 6h) + Brefeldin A (1μg/ml,3h) cell lysate at 20 µg
Lane 2:
Wild-type HeLa Treated TNF alpha (20ng/mL, 6h) + Brefeldin A (1μg/ml,3h) cell lysate at 20 µg
Lane 3:
CCL2 knockout HeLa Vehicle Control TNF alpha (0ng/mL, 6h) + Brefeldin A (1μg/ml,3h) cell lysate at 20 µg
Lane 4:
CCL2 knockout HeLa Treated TNF alpha (20ng/mL, 6h) + Brefeldin A (1μg/ml,3h) cell lysate at 20 µg
Predicted band size: 11 kDa
Observed band size: 11 kDa
false
Related conjugates and formulations (9)
-
Anti-MCP1 antibody [EPR21025]
-
578 PE
PE Anti-MCP1 antibody [EPR21025]
-
617 Alexa Fluor® 594
Alexa Fluor® 594 Anti-MCP1 antibody [EPR21025]
-
665 Alexa Fluor® 647
Alexa Fluor® 647 Anti-MCP1 antibody [EPR21025]
-
565 Alexa Fluor® 555
Alexa Fluor® 555 Anti-MCP1 antibody [EPR21025]
-
660 APC
APC Anti-MCP1 antibody [EPR21025]
-
519 Alexa Fluor® 488
Alexa Fluor® 488 Anti-MCP1 antibody [EPR21025]
-
775 Alexa Fluor® 750
Alexa Fluor® 750 Anti-MCP1 antibody [EPR21025]
-
Anti-MCP1 antibody [EPR21025] - Low endotoxin, Azide free
Reactivity data
Product details
ab242013 is the carrier-free version of ab214819.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Storage information
Supplementary information
This supplementary information is collated from multiple sources and compiled automatically.
Biological function summary
The role of MCP-1 is significant in guiding immune cells to areas requiring immune response. It does not form part of a complex but operates as a singular entity to affect immune signaling. MCP-1 influences the behavior of monocytes and macrophages by inducing chemotaxis and activating their effector functions. Through this mechanism it aids in the inflammatory response and tissue repair.
Pathways
MCP-1 participates in the inflammatory pathways by cooperating with key proteins like CCR2. It facilitates the JAK-STAT signaling pathway which is vital for transmitting extracellular information into cellular responses. The interaction of MCP-1 with CCR2 influences the activation of downstream proteins like STAT3 enabling various immune responses. MCP-1 thereby plays a central role in modulating inflammation-related pathways.
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Publications (1)
Recent publications for all applications. Explore the full list and refine your search
Oxidative medicine and cellular longevity 2022:4877275 PubMed35308175
2022
Applications
Unspecified application
Species
Unspecified reactive species
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com