Anti-POR1 antibody [EPR11943] - BSA and Azide free
- RabMAb
- Recombinant
- What is this?
Be the first to review this product! Submit a review
|
(0 Publication)
Rabbit Recombinant Monoclonal POR1 antibody. Carrier free. Suitable for ICC/IF, IP, WB, Flow Cyt (Intra), IHC-P and reacts with Human samples.
View Alternative Names
POR1, ARFIP2, Arfaptin-2, ADP-ribosylation factor-interacting protein 2, Partner of RAC1
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-POR1 antibody [EPR11943] - BSA and Azide free (AB250206)
This data was developed using ab180503, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Human gastric carcinoma tissue labeling POR2 with ab180503 at 1/500 dilution, followed by ImmunoHistoprobe (Ready to use) HRP Polymer for Rabbit IgG. Counter stained with Hematoxylin.
Perform heat mediated antigen retrieval with EDTA buffer pH 9 before commencing with IHC staining protocol.
- Flow Cyt (Intra)
Supplier Data
Flow Cytometry (Intracellular) - Anti-POR1 antibody [EPR11943] - BSA and Azide free (AB250206)
This data was developed using ab180503, the same antibody clone in a different buffer formulation.
Intracellular flow cytometric analysis of 2% paraformaldehyde-fixed SH-SY5Y cells labeling POR2 with ab180503 at 1/150 dilution (red), compared to a Rabbit monoclonal IgG Isotype control (green), followed by Goat anti rabbit IgG (FITC) secondary antibody at 1/75 dilution.
- ICC/IF
Supplier Data
Immunocytochemistry/ Immunofluorescence - Anti-POR1 antibody [EPR11943] - BSA and Azide free (AB250206)
This data was developed using ab180503, the same antibody clone in a different buffer formulation.
Immunofluorescent analysis of 4% paraformaldehyde-fixed SH-SY5Y cells labeling POR2 with ab180503 at 1/1000 dilution, followed by Goat anti rabbit IgG (Dylight 555) secondary antibody at 1/250 dilution. Counter stained with DAPI.
- IP
Supplier Data
Immunoprecipitation - Anti-POR1 antibody [EPR11943] - BSA and Azide free (AB250206)
This data was developed using ab180503, the same antibody clone in a different buffer formulation.
Western blot analysis of SH-SY5Y cell lysate (Lane 1) and Negative control (Lane 2) immunoprecipitated with ab180503 at 1/30 dilution. Rabbit TrueBlot® : Anti-Rabbit IgG HRP secondary antibody used at 1/1500 dilution.
All lanes:
Immunoprecipitation - Anti-POR1 antibody [EPR11943] (<a href='/en-us/products/primary-antibodies/por1-antibody-epr11943-ab180503'>ab180503</a>)
Predicted band size: 38 kDa
false
- WB
Supplier Data
Western blot - Anti-POR1 antibody [EPR11943] - BSA and Azide free (AB250206)
This data was developed using ab180503, the same antibody clone in a different buffer formulation.
All lanes:
Western blot - Anti-POR1 antibody [EPR11943] (<a href='/en-us/products/primary-antibodies/por1-antibody-epr11943-ab180503'>ab180503</a>) at 1/5000 dilution
Lane 1:
SH-SY5Y cell lysate at 20 µg
Lane 2:
MCF-7 cell lysate at 20 µg
Lane 3:
HeLa cell lysate at 20 µg
Lane 4:
HepG2 cell lysate at 20 µg
Secondary
All lanes:
Goat anti-rabbit IgG, (H+L), peroxidase conjugated at 1/1000 dilution
Predicted band size: 38 kDa
false
- WB
Lab
Western blot - Anti-POR1 antibody [EPR11943] - BSA and Azide free (AB250206)
This data was developed using the same antibody clone in a different buffer formulation (ab180503).
Lanes 1 - 4 : Merged signal (red and green). Green - ab180503 observed at 38 kDa. Red - loading control, ab7291 (Mouse anti-Alpha Tubulin [DM1A]) observed at 55 kDa.
ab180503 was shown to react with POR1 in western blot. The band observed in the knockout lysate lane above 38 kDa is likely to represent an inserted form. This has not been investigated further. Membranes were blocked in fluorescent western blot (TBS-based) blocking solution before incubation with ab180503 and ab7291 (Mouse anti-Alpha Tubulin [DM1A]) overnight at 4 °C at a 1 in 1000 dilution and a 1 in 20000 dilution respectively. Blots were incubated with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preabsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preabsorbed (ab216776) secondary antibodies at 1 in 20000 dilution for 1 h at room temperature before imaging.
All lanes:
Western blot - Anti-POR1 antibody [EPR11943] (<a href='/en-us/products/primary-antibodies/por1-antibody-epr11943-ab180503'>ab180503</a>) at 1/1000 dilution
Lane 1:
Wild-type HeLa cell lysate at 20 µg
Lane 2:
ARFIP2 CRISPR-Cas9 Edited HeLa cell lysate at 20 µg
Lane 3:
HepG2 cell lysate at 20 µg
Lane 4:
SH-SY5Y cell lysate at 20 µg
Predicted band size: 38 kDa
Observed band size: 38 kDa
false
Related conjugates and formulations (1)
-
Anti-POR1 antibody [EPR11943]
Reactivity data
Product details
ab250206 is the carrier-free version of ab180503.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Storage information
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com