Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free
- BOND RX™ Validated
- RabMAb
- Recombinant
- What is this?
Be the first to review this product! Submit a review
|
(1 Publication)
Rabbit Recombinant Monoclonal SOCS3 antibody. Carrier free. Suitable for IP, WB, IHC-P and reacts with Mouse, Human, Rat samples. Cited in 1 publication.
View Alternative Names
CIS3, SSI3, SOCS3, Suppressor of cytokine signaling 3, SOCS-3, Cytokine-inducible SH2 protein 3, STAT-induced STAT inhibitor 3, CIS-3, SSI-3
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Human skin tissue labelling SOCS3 with ab280884 at 1/1000 (0.576 ug/ml) dilution followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Negative control : no staining on human skin. (PMID : 22739986) The section was incubated with ab280884 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument. Counter stain Hematoxylin.
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Human colon tissue labelling SOCS3 with ab280884 at 1/1000 (0.576 ug/ml) dilution followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Positive staining on the stromal cells in human colon. (PMID : 28603075) The section was incubated with ab280884 for 30 mins at room temperature.The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Human placenta tissue labelling SOCS3 with ab280884 at 1/1000 (0.576 ug/ml) dilution followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Positive staining on human placenta. (PMID : 29201185 ) The section was incubated with ab280884 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
- IP
Supplier Data
Immunoprecipitation - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
SOCS3 was immunoprecipitated from 0.35 mg HeLa (human cervix adenocarcinoma epithelial cell) whole cell lysate 10ug with ab280884 at 1/30 dilution (2ug in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab280884 at 1/1000 dilution. VeriBlot for IP Detection Reagent (HRP)(ab131366) was used at 1/5000 dilution.
Lane 1 : HeLa (human cervix adenocarcinoma epithelial cell) whole cell lysate 10ug
Lane 2 : ab280884 IP in HeLa whole cell lysate
Lane 3 : Rabbit monoclonal IgG1 (ab18443) instead of ab280884 in HeLa whole cell lysate
Blocking and dilution buffer and concentration : 5% NFDM/TBST.
Exposure time : 58 seconds
All lanes:
Immunoprecipitation - Anti-SOCS3 antibody [EPR24090-74] (<a href='/en-us/products/primary-antibodies/socs3-antibody-epr24090-74-ab280884'>ab280884</a>)
Predicted band size: 24 kDa
false
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Rat colon tissue labelling SOCS3 with ab280884 at 1/1000 (0.576 ug/ml) dilution followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Positive staining on the stromal cells in rat colon. The section was incubated with ab280884 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
- IHC-P
Supplier Data
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Immunohistochemical analysis of paraffin-embedded Mouse spleen tissue labelling SOCS3 with ab280884 at 1/1000 (0.576 ug/ml) dilution followed by a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101). Positive staining on mouse spleen. The section was incubated with ab280884 for 30 mins at room temperature. The immunostaining was performed on a Leica Biosystems BOND® RX instrument Counterstained with Hematoxylin.
Secondary antibody only control : Secondary antibody is a ready to use Rabbit specific IHC polymer detection kit HRP/DAB (ab209101).
Heat mediated antigen retrieval with Tris-EDTA buffer (pH 9.0, epitope retrieval solution2) for 20 mins
- IP
Supplier Data
Immunoprecipitation - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
SOCS3 was immunoprecipitated from 0.35 mg RAW 264.7 (mouse abelson murine leukemia virus-induced tumor macrophage) treated with 100 ng/ml LPS (Lipopolysaccharide) for 4 hours whole cell lysate 10 ug with ab280884 at 1/30 dilution (2ug in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab280884 at 1/1000 dilution. VeriBlot for IP Detection Reagent (HRP)(ab131366) was used at 1/5000 dilution.
Lane 1 : RAW 264.7 (mouse abelson murine leukemia virus-induced tumor macrophage) treated with 100 ng/ml LPS (Lipopolysaccharide) for 4 hours whole cell lysate 10 ug
Lane 2 : ab280884 IP in RAW 264.7 treated with 100 ng/ml LPS (Lipopolysaccharide) for 4 hours whole cell lysate
Lane 3 : Rabbit monoclonal IgG (ab172730) instead of ab280884 in treated with 100 ng/ml LPS (Lipopolysaccharide) for 4 hours whole cell lysate
Blocking and dilution buffer and concentration : 5% NFDM/TBST.
Exposure time : 3 minutes
All lanes:
Immunoprecipitation - Anti-SOCS3 antibody [EPR24090-74] (<a href='/en-us/products/primary-antibodies/socs3-antibody-epr24090-74-ab280884'>ab280884</a>)
Predicted band size: 24 kDa
false
- WB
Lab
Western blot - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Blocking and diluting buffer and concentration : 5% NFDM/TBST
The expression profile/ molecular weight observed is consistent with what has been described in the literature (PMID : 17114447, 32306216, 31238931)
SOCS3 exists in two isoforms of different length that are encoded by one gene
Negative control : skin (PMID : 22739986)
Exposure time : 3 minutes
All lanes:
Western blot - Anti-SOCS3 antibody [EPR24090-74] (<a href='/en-us/products/primary-antibodies/socs3-antibody-epr24090-74-ab280884'>ab280884</a>) at 1/1000 dilution
Lane 1:
Human colon tissue lysate at 20 µg
Lane 2:
Human placenta tissue lysate at 20 µg
Lane 3:
Human skin tissue lysate at 20 µg
Lane 4:
Mouse spleen tissue lysate at 20 µg
Lane 5:
Mouse placenta tissue lysate at 20 µg
Lane 6:
Mouse skin tissue lysate at 20 µg
Lane 7:
HeLa (human cervix adenocarcinoma epithelial cell) whole cell lysate at 20 µg
Secondary
All lanes:
Goat Anti-Rabbit IgG (HRP) with minimal cross-reactivity with human IgG at 1/2000 dilution
Predicted band size: 24 kDa
Observed band size: 23 kDa,26 kDa
false
- WB
Lab
Western blot - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Blocking and diluting buffer and concentration : 5% NFDM/TBST
The expression profile/ molecular weight observed is consistent with what has been described in the literature (PMID : 17114447, 32306216, 31238931)
Exposure time : 26 seconds
All lanes:
Western blot - Anti-SOCS3 antibody [EPR24090-74] (<a href='/en-us/products/primary-antibodies/socs3-antibody-epr24090-74-ab280884'>ab280884</a>) at 1/1000 dilution
Lane 1:
Untreated RAW264.7 (mouse Abelson murine leukemia virus-induced tumor macrophage), whole cell lysate at 20 µg
Lane 2:
RAW264.7 treated with 100ng/ml LPS(Lipopolysaccharide) for 4 hours, whole cell lysates at 20 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Predicted band size: 24 kDa
Observed band size: 26 kDa
false
- WB
Supplier Data
Western blot - Anti-SOCS3 antibody [EPR24090-74] - BSA and Azide free (AB280889)
Blocking and dilution buffer : 5% NFDM/TBST.
ab181602 was used as loading control at 1/1000000 dilution.
This data was developed using ab280884, the same antibody clone in a different buffer formulation.
Lanes 1 - 3:
Western blot - Anti-SOCS3 antibody [EPR24090-74] (<a href='/en-us/products/primary-antibodies/socs3-antibody-epr24090-74-ab280884'>ab280884</a>) at 1/1000 dilution
Lanes 4 - 6:
Western blot - Anti-SOCS3 antibody (<a href='/en-us/products/primary-antibodies/socs3-antibody-ab16030'>ab16030</a>) at 1/1000 dilution
Lanes 1 and 4:
KARPAS-299 (Human anaplastic large cell lymphoma) whole cell lysate at 20 µg
Lanes 2 and 5:
Ramos (Human Burkitt's lymphoma B lymphocyte) whole cell lysate at 20 µg
Lanes 3 and 6:
Jurkat (Human T cell leukemia T lymphocyte) whole cell lysate at 20 µg
Secondary
All lanes:
Western blot - Goat Anti-Rabbit IgG H&L (HRP) (<a href='/en-us/products/secondary-antibodies/goat-rabbit-igg-h-l-hrp-ab97051'>ab97051</a>) at 1/20000 dilution
Predicted band size: 24 kDa
Observed band size: 23 kDa,26 kDa
false
Exposure time: 180s
Related conjugates and formulations (1)
-
Anti-SOCS3 antibody [EPR24090-74]
Reactivity data
Product details
ab280889 is the carrier-free version of ab280884.
Patented technology
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
What are the advantages of a recombinant monoclonal antibody?
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free batch production
For more information, read more on recombinant antibodies.
Conjugation ready
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with 1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
Compatibility
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
Properties and storage information
Form
Purification technique
Storage buffer
Shipped at conditions
Appropriate short-term storage conditions
Appropriate long-term storage conditions
Product protocols
- Visit the General protocols
- Visit the Troubleshooting
Target data
Publications (1)
Recent publications for all applications. Explore the full list and refine your search
Molecular medicine (Cambridge, Mass.) 30:78 PubMed38844873
2024
Applications
Unspecified application
Species
Unspecified reactive species
Product promise
Please note: All products are 'FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC OR THERAPEUTIC PROCEDURES'.
For licensing inquiries, please contact partnerships@abcam.com