Protein G Gold Conjugate (40nm, 10 OD)

Protein G Gold Conjugate (40nm, 10 OD) (Protein A Gold Conjugate (40nm, 10 OD) ab270695) is manufactured using our Gold Nanoparticles which have a protective coating that can withstand the most extreme conditions (e.g. 2.5 M NaOH at 70°C for >1 hour). The irreversible covalent attachment does not allow the desorption of the Protein A, which is a major problem associated with gold conjugates when developed using passive adsorption techniques.

To exchange the conjugate into a specific buffer for your assay or test, centrifuge the conjugate in a microfuge at 9,000 x g for 6 minutes. Carefully remove the supernatant and add your preferred buffer. It is important to avoid substances that have a very high affinity for gold (e.g. thiols).

The maximum absorbance for Protein G (40nm Gold) is at 530 nm. To determine the effective concentration of the conjugate obtained we advise to measure the Absmax of light using an UV-vis spectrophotometer after diluting your sample to an appropriate range for your piece of equipment (e.g. if a 40 nm gold conjugate is at 10 OD and is diluted 1:10 the Abs_530nm for a 1 cm light path is expected to be around 1 AU).

Before using Protein G Gold Conjugate (40nm, 10 OD) to detect a specific antibody we recommend that you check the affinity of Protein A for that antibody and subtype (see table below). Rabbit and human IgGs, for example, are good candidates because they bind to Protein A with high affinity.

Protein G Gold Conjugate (40nm, 10 OD) is tested as a detector tool in Lateral Flow Assay but can also be used in electron and light microscopy, immunoblotting, and dot-blot. As Protein G Gold Conjugate (40nm, 10 OD) affinity for antibodies can vary, a titration of the specific antibody used is recommended in order to obtain the optimal performance. We recommend performing the incubation of Protein G Gold Conjugate (40nm, 10 OD) with the antibody in a buffer that has a pH between 5 and 7.5, for at least 10-15 minutes. After this stage do not centrifuge the gold complex.

This product is manufactured by Expedeon, an Abcam company. It was previously called 40nm InnovaCoat^® GOLD (10 OD) Protein G Conjugate. Expedeon product code 223-0200 is the same as the 200 μl size of this product and code 223-1000 is the same as the 1 mL size.