CD45 (PTPRC)
Figure 1: CD45 target protein structure.
CD45 Target Introduction
Protein Function
- CD45 is a receptor-type protein tyrosine phosphatase that is present in all hematopoietic cells except red blood and plasma cells. This large glycoprotein (180-220 kDa) accounts for 5 to 10% of the abundance on the surface of positive-expressing cells.
- As a type I transmembrane protein, CD45 consists of two intracellular phosphatase domains, one transmembrane domain, and one extracellular domain. Only one of the two intracellular domains has intrinsic kinase activity, but both are necessary for CD45 to recruit substrates.
- T cells require CD45 for antigen detection and response, as CD45 activates the Src family kinase Lck, which phosphorylates the T cell antigen receptor (TCR) complex, leading to increased cytokine production and T cell proliferation.
- On the other hand, CD45 can also dephosphorylate the same signaling motifs in the TCR complex acted upon by Lck, thereby inhibiting the TCR signaling pathway.
- CD45 deficiency leads to functional impairments in T lymphocytes and B lymphocytes, resulting in severe combined immunodeficiency. CD45 also plays an important role in autoimmune diseases, cancer, and infectious diseases.
Protein Expression
- High levels of expression in bone marrow, lymph nodes, spleen, and tonsils.
- CD45 isoforms 1, 2, 3, 5, and 7 can be detected in human thymocytes, while isoforms 4, 6, and 8 are not detected.
Protein Localization
- Cell membrane.
- Co-localizes with DPP4 in membrane rafts.
Figure 2: ICC experimental result image of CD45 protein, using Anti-CD45 antibody (ab40763). Green: CD45, Red: alpha Tubulin, Blue: DAPI.
Isoforms & Post-translation modifications
- Human (P08575):
Isoforms 1-8 (P08575-3~ P08575-10): 131-147 kDa (predicted) - Mouse (P06800):
Isoforms 1-3 (P06800-4~ P06800-6): 130-144 kDa (predicted) - Rat (P04157):
Isoforms 1-5 (P04157-1~ P04157-5): 129-143 kDa (predicted) - Highly N-/O-glycosylated
IHC experiment tips
Precautions
- Since CD45 is selectively expressed at high levels in lymphoid organs, it is essential to confirm the expression level of the target protein in the sample before detection. Also, we recommend conducting the experiment with the positive control suggested in the antibody product manual.
- Please follow the recommended antigen retrieval method in the antibody product manual. For example, when conducting IHC experiments using ab208022, we recommend using pH 9.0 Tris/EDTA buffer for heat antigen retrieval.
Positive control
- Human tonsil and spleen tissue
- Mouse spleen tissue
- Rat spleen tissue
Negative control
- Human skeletal muscle and kidney tissue
Example of results
Figure 3: IHC experimental results of CD45 protein, Anti-CD45 antibody (ab40763).
Sample name: Human tonsil paraffin section.
Primary antibody: diluted 250 times.
Antigen retrieval method: Heat-induced antigen retrieval, Tris-EDTA buffer (pH 9.0).
Figure 4: IHC experimental result image of CD45 protein, Anti-CD45 antibody (ab281586).
Sample name: Mouse spleen paraffin section.
Primary antibody: Diluted 2000 times.
Antigen retrieval method: Heat-induced antigen retrieval, Tris-EDTA buffer (pH 9.0).
Key control points
In the experiment, special attention should be given to key control points in addition to routine issues:
Sample fixation:
- The sample fixation time depends on the size of the tissue block and the type of tissue, but for most samples, such as fixation with 4% PFA, it is more appropriate to fix at room temperature for 18-24 hours.
- For IHC-Fr experiments using perfusion-fixed tissues, no further fixation is required after sectioning; if fresh tissues frozen with isopentane are used, the sections need to be fixed with 4°C pre-cooled PFA or methanol for 10 minutes after sectioning.
Antigen retrieval:
- When performing immunohistochemistry experiments on paraffin sections, we recommend using a pressure cooker for heat-induced antigen retrieval. You can try fixing the sections at 110°C for 15 minutes. After retrieval, let it cool naturally, avoid putting it in cold water to prevent delamination caused by sudden temperature drop.
Blocking:
- If using HRP conjugates for detection, please use 3% hydrogen peroxide to treat the sections for 10 minutes to block endogenous peroxidase.
- If using fluorescently labeled secondary antibodies for experiments, it is recommended to use a blocking solution containing 1% BSA and a final concentration of 0.3 M glycine to quench the spontaneous fluorescence caused by aldehyde groups.
Antibody incubation:
- Use a signal amplification system to obtain a stronger experimental signal, such as Polymer-conjugated HRP secondary antibodies.
ICC experimental tips
Precautions
- Please follow the recommended fixation method in the antibody product manual for cell fixation. For example, when using ab197730 to detect CD45 in Jurkat cells, we recommend using 4% formaldehyde or 80% methanol fixation for 5 minutes to obtain a positive signal more easily.
- Although CD45 is a membrane protein, it is also crucial to permeabilize the cells during ICC experiments. For example, when fixing cells with aldehydes (such as 4% formaldehyde), we recommend using 0.1-0.25% Triton-X 100 at room temperature for 10 minutes.
Positive control
- Jurkat cells
Example of results
Figure 5: ICC experimental result image of CD45 protein, Anti-CD45 antibody (ab30470).
Sample name: Jurkat cells
Primary antibody: 5-10µg/mL
Blocking solution: 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween
Key control points
In the experiment, in addition to paying attention to routine issues, special attention should be paid to the following key control points:
Cell culture:
- Cell culture is the basis for subsequent ICC detection. Before the experiment, it is necessary to ensure that the cell status is normal. A confluence of 60% to 80% is suitable for most samples.
Sample fixation:
- If aldehydes (such as 4% PFA) are used for fixation, we recommend fixing at room temperature for 10-20 minutes. Aldehyde fixation is preferred for nuclear proteins.
- If organic solvents (such as methanol) are used for fixation, we recommend fixing at -20°C for 5-10 minutes.
- If methanol is chosen as the fixative, we recommend fixing suspended cells with 80% methanol and adherent cells with 100% methanol.
Blocking:
- The recommended blocking solution is: 1% BSA + 10% serum from the secondary antibody source + 0.3M glycine in PBS containing 0.1% tween20, to quench the autofluorescence caused by aldehyde groups.
References
- J G Altin, E K Sloan. The role of CD45 and CD45-associated molecules in T cell. Immunol Cell Biol. (1997) 75(5), 430-445. doi: https://doi.org/10.1038/icb.1997.68
- Andreas Rheinländer, Burkhart Schraven, Ursula Bommhardt. CD45 in human physiology and clinical medicine. Immunol Lett.(2018) 196, 22-32.doi: https://doi.org/10.1016/j.imlet.2018.01.009
- Adam H Courtney , Alexey A Shvets , Wen Lu et al. CD45 functions as a signaling gatekeeper in T cells. Sci Signal.(2019) 12(604): eaaw8151. doi: https:///doi/10.1126/scisignal.aaw8151