HRP Anti-Diphtheria Toxin antibody (ab34420)

Submit a review Q&A (1)

Key features and details

  • HRP Goat polyclonal to Diphtheria Toxin
  • Suitable for: ELISA, WB
  • Conjugation: HRP
  • Isotype: IgG

Overview

  • Product name

    HRP Anti-Diphtheria Toxin antibody
    See all Diphtheria Toxin primary antibodies

  • Description

    HRP Goat polyclonal to Diphtheria Toxin

  • Host species

    Goat

  • Conjugation

    HRP

  • Specificity

    Reacts with purified diptheria toxin/toxoid.

  • Tested applications

    Suitable for: ELISA, WBmore details

  • Species reactivity

    Reacts with: Other species

  • Immunogen

    Full length protein corresponding to Diphtheria Toxin. Full length purified diptheria toxoid protein from Corynebacterium diphtheriae.
    Database link: Q6NK15

  • General notes

    Highly purified preparation of horseradish peroxidase. Free enzyme is absent.

    Storage in frost-free freezers is not recommended.
    This product should be stored undiluted. Should this product contain a precipitate we recommend microcentrifugation before use.

    Reproducibility is key to advancing scientific discovery and accelerating scientists’ next breakthrough.

    Abcam is leading the way with our range of recombinant antibodies, knockout-validated antibodies and knockout cell lines, all of which support improved reproducibility.

    We are also planning to innovate the way in which we present recommended applications and species on our product datasheets, so that only applications & species that have been tested in our own labs, our suppliers or by selected trusted collaborators are covered by our Abpromise™ guarantee.

    In preparation for this, we have started to update the applications & species that this product is Abpromise guaranteed for.

    We are also updating the applications & species that this product has been “predicted to work with,” however this information is not covered by our Abpromise guarantee.

    Applications & species from publications and Abreviews that have not been tested in our own labs or in those of our suppliers are not covered by the Abpromise guarantee.

    Please check that this product meets your needs before purchasing. If you have any questions, special requirements or concerns, please send us an inquiry and/or contact our Support team ahead of purchase. Recommended alternatives for this product can be found below, as well as customer reviews and Q&As.

Properties

  • Form

    Liquid

  • Storage instructions

    Shipped at 4°C. Store at +4°C. Avoid freeze / thaw cycle. Please see notes section.

  • Storage buffer

    pH: 7.20
    Preservative: 0.002% Thimerosal (merthiolate)
    Constituents: 1% BSA, PBS
  • Concentration information loading...

  • Purification notes

    Purified IgG

  • Clonality

    Polyclonal

  • Isotype

    IgG

  • Research areas

Applications

Our Abpromise guarantee covers the use of ab34420 in the following tested applications.

The application notes include recommended starting dilutions; optimal dilutions/concentrations should be determined by the end user.

Application Abreviews Notes
ELISA 1/200 - 1/1000.
WB 1/20 - 1/200. Predicted molecular weight: 58 kDa.

Target

  • Relevance

    Corynebacterium diphtheriae is a gram-positive, nonmotile bacteria found in soil and animal feces. C. diphteriae infect the epithelial cells of the upper respiratory tract from where they produce and secrete a potent toxin. This toxin is absorbed and disseminated through lymph channels and blood to the susceptible tissues of the body.

  • Cellular localization

    Secreted

  • Alternative names

    • Corynebacterium diphtheriae toxoid antibody
    • Diphtheria Toxin antibody
    • tox antibody

References (0)

Publishing research using ab34420? Please let us know so that we can cite the reference in this datasheet.

ab34420 has not yet been referenced specifically in any publications.

Customer reviews and Q&As

Show All Reviews Q&A
Submit a review Submit a question

Question

Order Details Antibody code: ab34420 Problem Choose: Problem with standard curve No signal or weak signal High background problem with standard curve and high background Lot number ab34420 (mAb anti-DT)  lot.877395 ab51882 (pAb-HRP anti DT) lot. 949834 Purchase order number or preferably Abcam order number we don’t have order number, the antibodies were ordered more than six months ago General Information Antibody storage conditions (temperature/reconstitution etc) 2-8°C in the dark Description of the problem (high background, no signal, non-specific color development, poor standard curve etc.) poor standard curve, no reproducibility of standard curve and high background in sandwich ELISA setup. Sandwich ELISA Sample (Species/Cell type/Cell line etc.) Diphtheria Toxoids Coating well (Buffer/Concentration of the coating material etc.) Carbonate buffer 50mM, pH 9.6 Blocking conditions (Buffer/time period, Blocking agent etc.) 2h 37°C, Milk 5% in PBST 1X Primary Antibody (Manufacturer/Species/Diluent/Dilution/Incubation time, Wash step) ab34420 (mAb anti-DT) diluted in carbonate buffer 50mM, pH 9.6 2. at 1ug/mL, 1H 37°C, washed three times with 100ul/well PBST Secondary Antibody (Manufacturer/Species/Diluent/Dilution/Incubation time, Wash step) ab51882 (pAb-HRP anti DT) diluted 1:1000 in Milk 2.5% PBST, 1H 37°C, washed three times with 100ul/well PBST Detection method (Substrate/Diluent etc.) TMB Sigma  100uL/well after 15min added H2SO4 1N 100 ul/well Positive and negative controls used (please specify) Diphtheria Toxoids 12 Lf/mL (positive control) PBST 1X (Negative control) Optimization attempts (problem solving) How many times have you tried the ELISA? more than 10 times to set up the assau Have you run a "No Primary" control? yes Yes No Do you obtain the same results every time? Yes No no What steps have you altered? IAb dilution, to set up the assay Additional Notes: we tested ab34420 (mAb anti-DT)  lot.877395 in indirect ELISA, poor or no standard curve detected varying the mAb concentration. Data: below and exemplum of the results we obtained during sandwich ELISA set up.   Coating 1ug/ml in carbonate buffer 50mM, pH9.6 ab34420, Blocking 1h 37°C in PBST and Milk 5%, Standard curve from 48.5 Lf/mL (serial dilution 1:2), IAb-HRP diluted 1:1000 and 1:500 in PBST and Milk 2,5%, development 15min, TMB.     std. Curve Lf/mL ab51882 dil  1_1000 ab51882 dil 1_500 48,5 0,377 0,384 0,518 0,492 24,25 0,263 0,282 0,318 0,397 12,125 0,279 0,273 0,319 0,316 6,0625 0,175 0,206 0,299 0,317 3,03125 0,145 0,187 0,155 0,189 1,515625 0,112 0,14 0,426 0,156 0,7578125 0,093 0,16 0,188 0,151 0,37890625 0,074 0,078 0,142 0,13 0,189453125 0,077 0,079 0,124 0,138 0,094726563 0,085 0,077 0,144 0,058 0,047363281 0,086 0,109 0,199 0,099 Bkg 0,072 0,094 0,141 0,143 We would appreciate if you are able to provide a copy of the data, particularly from the standard curve. This will help us to assess the results.    

Read More
Answer

 Thank you for your reply and for taking the time to complete our questionnaire. The details you have kindly provided will enable us to investigate this case for you and this is also helpful in our records for monitoring of quality. Reviewing this case, I would like to offer some suggestions to help optimize the results from ab51882 and ab34420. I would also appreciate if you can confirm some further details: 1. I can suggest to try coating the plates overnight at 4oC.  This can sometimes improve the coating. 2. The concentration of antibodies may require increasing for optimization of results.  Have higher concentrations been tried? 3,  Could you confirm if the substrate solutions have been prepared immediately before use and are in date? 4. As discussed in the previous email, I am sorry these antibodies are regrettably not tested and guaranteed in sandwich ELISA (sELISA).  It may be they are not suitable for use together in sELISA.  These antibodies have been tested in indirect ELISA, and we can provide our 6 month guarantee for this application.  Could you provide the results from the indirect ELISA's? I can suggest to try the same suggestions for indirect ELISA to help optimize the results.   In the event that a product is not functioning in the tested applications cited on the product data sheet (and the problem has been reported within 6 months of purchase), we will be pleased to provide a credit note, free of charge replacement or refund. I hope this information is helpful, thank you for your cooperation. Should the suggestions not improve the results, please do not hesitate to contact me again with the further requested details.  

Read More

Please note: All products are "FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES"
For licensing inquiries, please contact partnerships@abcam.com