Overview

  • Product name

    PE/Cy5.5® Conjugation Kit
  • Product overview

    PE/Cy5.5® Conjugation Kit ab102871 uses a simple and quick process to conjugate an antibody to PE/Cy5.5®. It can also be used to conjugate other proteins or peptides.


    To conjugate an antibody to PE/Cy5.5® using this kit:
    - add modifier to antibody and incubate for 3 hrs
    - add quencher and incubate for 30 mins
    The conjugated antibody can be used immediately in WB, ELISA, IHC etc. No further purification is required and 100% of the antibody is recovered for use.


    Learn about buffer compatibility below; for incompatible buffers and low antibody concentrations, use our rapid antibody purification and concentration kits. Use the FAQ to learn more about the technology, or about conjugating other proteins and peptides to PE/Cy5.5®.


     

  • Notes

    Amount and volume of antibody for conjugation to PE/Cy5.5®.

     Kit size   Recommended 
    amount of antibody
    1 
    Maximum antibody 
    volume2
    30 µg   3 x 10 µg 3 x 10 µL
    60 µg   60 µg  60 µL
    180 µg   3 x 60 µg 3 x 60 µL
    600 µg   600 µg 600 µL

    Kit is designed to give a 1:1 molar ratio of antibody to PE after conjugation.

    2 Ideal antibody concentration is 1mg/ml. 0.5 - 1 mg/ml can be used if the maximum antibody volume is not exceeded. Antibodies > 5mg/ml or < 0.5 mg/ml should be diluted /concentrated.

    The selling size of this product has been changed – it is now based on the amount of antibody that can be conjugated with the kit, not the amount of PE mix provided. The amount of antibody advised that can be used with the kit has also been updated to reflect what will give the best conjugation results. The quantity and formulation of reagents provided have not changed, if you have been previously using the kit successfully with a different amount of antibody, there is no need to change the way that you are using the kit.

     

    Buffer Requirements for Conjugation

    Buffer should be pH 6.5-8.5.

    Compatible buffer constituents 
    If a concentration is shown, then the constituent should be no more than the concentration shown. If several constituents are close to the limit of acceptable concentration, then this can inhibit conjugation.

    50mM / 0.6% Tris1 0.1% BSA 50% glycerol
    0.1% sodium azide PBS Potassium phosphate
    Sodium chloride HEPES Sucrose
    Sodium citrate EDTA Trehalose

    1 Tris buffered saline is almost always ≤ 50 mM / 0.6%

    Incompatible buffer constituents

    Thiomerosal Proclin Glycine
    Arginine Glutathione DTT

    If a constituent of the buffer containing your antibody or protein is not listed above, please check the FAQ or contact us.

    Only purified antibodies are suitable for use, ie. where other proteins, peptides, or amino acids are not present: antibodies in ascites fluid, serum or hybridoma culture media are incompatible.

  • Tested applications

    Suitable for: Conjugationmore details

Properties

Applications

Our Abpromise guarantee covers the use of ab102899 in the following tested applications.

The application notes include recommended starting dilutions; optimal dilutions/concentrations should be determined by the end user.

Application Abreviews Notes
Conjugation Use at an assay dependent dilution.

Images

  • This illustration demonstrates a general procedure and will slightly vary dependent on the conjugate used.

     

References

ab102899 has not yet been referenced specifically in any publications.

Customer reviews and Q&As

There are currently no Customer reviews or Questions for ab102899.
Please use the links above to contact us or submit feedback about this product.

Please note: All products are "FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES"
For licensing inquiries, please contact partnerships@abcam.com

Sign up