Human VCL (Vinculin) knockout HeLa cell line (ab265580)
Overview
-
Product name
Human VCL (Vinculin) knockout HeLa cell line
See all Vinculin lysates -
Parental Cell Line
HeLa -
Organism
Human -
Mutation description
Knockout achieved by using CRISPR/Cas9, Homozygous: 1 bp insertion in exon 1 -
Passage number
<20 -
Knockout validation
Sanger Sequencing, Western Blot (WB) -
Tested applications
Suitable for: WBmore details -
Biosafety level
2 -
General notes
Recommended control: Human wild-type HeLa cell line (ab255928). Please note a wild-type cell line is not automatically included with a knockout cell line order, if required please add recommended wild-type cell line at no additional cost using the code WILDTYPE-TMTK1.
Cryopreservation cell medium: Cell Freezing Medium-DMSO Serum free media, contains 8.7% DMSO in MEM supplemented with methyl cellulose.
Culture medium: DMEM (High Glucose) + 10% FBS
Initial handling guidelines: Upon arrival, the vial should be stored in liquid nitrogen vapor phase and not at -80°C. Storage at -80°C may result in loss of viability.
1. Thaw the vial in 37°C water bath for approximately 1-2 minutes.
2. Transfer the cell suspension (0.8 mL) to a 15 mL/50 mL conical sterile polypropylene centrifuge tube containing 8.4 mL pre-warmed culture medium, wash vial with an additional 0.8 mL culture medium (total volume 10 mL) to collect remaining cells, and centrifuge at 201 x g (rcf) for 5 minutes at room temperature. 10 mL represents minimum recommended dilution. 20 mL represents maximum recommended dilution.
3. Resuspend the cell pellet in 5 mL pre-warmed culture medium and count using a haemocytometer or alternative cell counting method. Based on cell count, seed cells in an appropriate cell culture flask at a density of 2x104 cells/cm2. Seeding density is given as a guide only and should be scaled to align with individual lab schedules.
4. Incubate the culture at 37°C incubator with 5% CO2. Cultures should be monitored daily.Subculture guidelines:
- All seeding densities should be based on cell counts gained by established methods.
- A guide seeding density of 2x104 cells/cm2 is recommended.
- A partial media change 24 hours prior to subculture may be helpful to encourage growth, if required.
- Cells should be passaged when they have achieved 80-90% confluence.
This product is subject to limited use licenses from The Broad Institute, ERS Genomics Limited and Sigma-Aldrich Co. LLC, and is developed with patented technology. For full details of the licenses and patents please refer to our limited use license and patent pages.
We will provide viable cells that proliferate on revival.
Properties
-
Number of cells
1 x 106 cells/vial, 1 mL -
Adherent /Suspension
Adherent -
Tissue
Cervix -
Cell type
epithelial -
Disease
Adenocarcinoma -
Gender
Female -
STR Analysis
Amelogenin X D5S818: 11, 12 D13S317: 12, 13.3 D7S820: 8, 12 D16S539: 9, 10 vWA: 16, 18 TH01: 7 TPOX: 8,12 CSF1PO: 9, 10 -
Antibiotic resistance
Puromycin 1.00µg/ml -
Mycoplasma free
Yes -
Storage instructions
Shipped on Dry Ice. Store in liquid nitrogen. -
Storage buffer
Constituents: 8.7% Dimethylsulfoxide, 2% Cellulose, methyl ether -
Research areas
Target
-
Function
Actin filament (F-actin)-binding protein involved in cell-matrix adhesion and cell-cell adhesion. Regulates cell-surface E-cadherin expression and potentiates mechanosensing by the E-cadherin complex. May also play important roles in cell morphology and locomotion. -
Tissue specificity
Metavinculin is muscle-specific. -
Involvement in disease
Defects in VCL are the cause of cardiomyopathy dilated type 1W (CMD1W) [MIM:611407]. Dilated cardiomyopathy is a disorder characterized by ventricular dilation and impaired systolic function, resulting in congestive heart failure and arrhythmia. Patients are at risk of premature death.
Defects in VCL are the cause of cardiomyopathy familial hypertrophic type 15 (CMH15) [MIM:613255]. It is a hereditary heart disorder characterized by ventricular hypertrophy, which is usually asymmetric and often involves the interventricular septum. The symptoms include dyspnea, syncope, collapse, palpitations, and chest pain. They can be readily provoked by exercise. The disorder has inter- and intrafamilial variability ranging from benign to malignant forms with high risk of cardiac failure and sudden cardiac death. -
Sequence similarities
Belongs to the vinculin/alpha-catenin family. -
Domain
Exists in at least two conformations. When in the closed, 'inactive' conformation, extensive interactions between the head and tail domains prevent detectable binding to most of its ligands. It takes on an 'active' conformation after cooperative and simultaneous binding of two different ligands. This activation involves displacement of the head-tail interactions and leads to a significant accumulation of ternary complexes. The active form then binds a number of proteins that have both signaling and structural roles that are essential for cell adhesion.
The N-terminal globular head (Vh) comprises of subdomains D1-D4. The C-terminal tail (Vt) binds F-actin and cross-links actin filaments into bundles. An intramolecular interaction between Vh and Vt masks the F-actin-binding domain located in Vt. The binding of talin and alpha-actinin to the D1 subdomain of vinculin induces a helical bundle conversion of this subdomain, leading to the disruption of the intramolecular interaction and the exposure of the cryptic F-actin-binding domain of Vt. Vt inhibits actin filament barbed end elongation without affecting the critical concentration of actin assembly. -
Post-translational
modificationsPhosphorylated; on serines, threonines and tyrosines. Phosphorylation on Tyr-1133 in activated platelets affects head-tail interactions and cell spreading but has no effect on actin binding nor on localization to focal adhesion plaques.
Aceylated; mainly by myristic acid but also small amount of palmitic acid. -
Cellular localization
Cytoplasm > cytoskeleton. Cell junction > adherens junction. Cell membrane. Cytoplasmic face of adhesion plaques. Recruitment to cell-cell junctions occurs in a myosin II-dependent manner. Interaction with CTNNB1 is necessary for its localization to the cell-cell junctions. - Information by UniProt
Associated products
-
KO cell lysates
-
Related Products
Applications
The Abpromise guarantee
Our Abpromise guarantee covers the use of ab265580 in the following tested applications.
The application notes include recommended starting dilutions; optimal dilutions/concentrations should be determined by the end user.
Application | Abreviews | Notes |
---|---|---|
WB |
Use at an assay dependent concentration. Predicted molecular weight: 124 kDa.
|
Notes |
---|
WB
Use at an assay dependent concentration. Predicted molecular weight: 124 kDa. |
Images
-
All lanes : Anti-Vinculin antibody [EPR19579] (ab207440) at 1/1000 dilution
Lane 1 : Wild-type HeLa cell lysate
Lane 2 : Vinculin knockout HeLa cell lysate
Lane 3 : HEK-293 cell lysate
Lane 4 : Jurkat cell lysate
Lysates/proteins at 20 µg per lane.
Secondary
All lanes : Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (ab216773) at 1/20000 dilution
Performed under reducing conditions.
Predicted band size: 124 kDa
Observed band size: 124 kDaLanes 1-4: Merged signal (red and green). Green - ab207440 observed at 124 kDa. Red - loading control ab7291 observed at 50 kDa.
ab207440 Anti-Vinculin antibody [EPR19579] was shown to specifically react with Vinculin in wild-type HeLa cells. Loss of signal was observed when knockout cell line ab265580 (knockout cell lysate ab257795) was used. Wild-type and Vinculin knockout samples were subjected to SDS-PAGE. ab207440 and Anti-alpha Tubulin antibody [DM1A] - Loading Control (ab7291) were incubated overnight at 4°C at 1 in 1000 dilution and 1 in 20000 dilution respectively. Blots were developed with Goat anti-Rabbit IgG H&L (IRDye® 800CW) preadsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preadsorbed (ab216776) secondary antibodies at 1 in 20000 dilution for 1 hour at room temperature before imaging.
-
Homozygous: 1 bp insertion in exon 1.
Protocols
Datasheets and documents
-
SDS download
-
Datasheet download
References (0)
ab265580 has not yet been referenced specifically in any publications.