Product name149Sm Metal Conjugation Kit - Lightning-Link®
149Sm Metal Conjugation Kit - Lightning-Link® (ab269833) provides an easy-to-use, one step procedure that allows researchers to label proteins, peptides and other biomolecules containing primary amines with 149Sm with only 30 seconds hands-on time; furthermore conjugates are ready to use in less than twenty minutes.
This product is manufactured by Expedeon, an Abcam company. Expedeon product code M149-0010 was previously called Lightning Link®-149Sm, 1 x 10 µg and is the same as the 10 µg size of this product. Expedeon product code M149-0100 was previously called Lightning Link®-149Sm, 1 x 100 µg and is the same as the 100 µg size.
The antibody to be labeled should be purified, in an appropriate buffer for conjugation and at a suitable concentration, as described in section 6. If not, consider using our antibody purification and concentration kits.
Learn about buffer compatibility below; for incompatible buffers and low antibody concentrations, use our rapid antibody purification and concentration kits. Use the FAQ to learn more about the technology, or about conjugating other proteins and peptides to 149Sm.
Buffer Requirements for Conjugation
Buffer should be pH 6.5-8.5.
Compatible buffer constituents
If a concentration is shown, then the constituent should be no more than the concentration shown. If several constituents are close to the limit of acceptable concentration, then this can inhibit conjugation.
50mM / 0.6% Tris1 0.1% BSA2 50% glycerol 0.1% sodium azide PBS Potassium phosphate Sodium chloride HEPES Sucrose Sodium citrate EDTA Trehalose
1 Tris buffered saline is almost always ≤ 50 mM / 0.6%
2 BSA can also interfere with the use of the conjugated antibody in tissue staining.
Incompatible buffer constituents
Thiomerosal Proclin Glycine Arginine Glutathione DTT
Only purified antibodies are suitable for use, ie. where other proteins, peptides, or amino acids are not present: antibodies in ascites fluid, serum or hybridoma culture media are incompatible.
Storing and handling conjugation kits
Lyophilized Lightning-Link® components are hygroscopic.
Kits are intentionally shipped at ambient temperature with silica gel to avoid exposure to moisture. Upon receipt, store the kit frozen and protect from moisture. Before opening the outer container, allow the lyophilized components to reach room temperature to minimize condensation.
Storage instructionsStore at -20°C. Please refer to protocols.
Components 100 µg ab274200 - 149Sm mix (Lyophilized) 1 x 100µg ab273994 - Modifier reagent 1 x 200µl ab274133 - Quencher reagent 1 x 200µl
ab269833 has not yet been referenced specifically in any publications.