Recombinant Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Key features and details
- Produced recombinantly (animal-free) for high batch-to-batch consistency and long term security of supply
- Rabbit monoclonal [EPR3113] to Neuropilin 1 - BSA and Azide free
- Suitable for: Flow Cyt (Intra), WB, IHC-P, IP, ICC/IF
- Knockout validated
- Reacts with: Mouse, Rat, Human
Related conjugates and formulations
Overview
-
Product name
Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free
See all Neuropilin 1 primary antibodies -
Description
Rabbit monoclonal [EPR3113] to Neuropilin 1 - BSA and Azide free -
Host species
Rabbit -
Tested applications
Suitable for: Flow Cyt (Intra), WB, IHC-P, IP, ICC/IFmore details -
Species reactivity
Reacts with: Mouse, Rat, Human
Predicted to work with: Monkey, Common marmoset -
Immunogen
Synthetic peptide. This information is proprietary to Abcam and/or its suppliers.
-
Positive control
- WB: Wild-type A549, MDA-MB-231, HUVEC and HepG2 whole cell lysate (ab7900), human placenta, kidney and heart, mouse heart and kidney and rat heart and kidney tissue lysates. IHC-P: Human liver tissue; Rat brain tissue; Mouse brain tissue. ICC/IF: MCF7 and HUVEC cells; Omentum and effluent-derived mesothelial cells; COS1 fibroblast-like cell line derived from monkey kidney tissue. Flow Cyt (intra): HepG2 and MCF7 cells. IHC-Fr: Human kidney tissue. IP: Mouse heart tissue lysate.
-
General notes
ab184783 is the carrier-free version of ab81321.
Our carrier-free antibodies are typically supplied in a PBS-only formulation, purified and free of BSA, sodium azide and glycerol. The carrier-free buffer and high concentration allow for increased conjugation efficiency.
This conjugation-ready format is designed for use with fluorochromes, metal isotopes, oligonucleotides, and enzymes, which makes them ideal for antibody labelling, functional and cell-based assays, flow-based assays (e.g. mass cytometry) and Multiplex Imaging applications.
Use our conjugation kits for antibody conjugates that are ready-to-use in as little as 20 minutes with <1 minute hands-on-time and 100% antibody recovery: available for fluorescent dyes, HRP, biotin and gold.
This product is compatible with the Maxpar® Antibody Labeling Kit from Fluidigm, without the need for antibody preparation. Maxpar® is a trademark of Fluidigm Canada Inc.
This product is a recombinant monoclonal antibody, which offers several advantages including:
- - High batch-to-batch consistency and reproducibility
- - Improved sensitivity and specificity
- - Long-term security of supply
- - Animal-free production
Our RabMAb® technology is a patented hybridoma-based technology for making rabbit monoclonal antibodies. For details on our patents, please refer to RabMAb® patents.
Properties
-
Form
Liquid -
Storage instructions
Shipped at 4°C. Store at +4°C. Do Not Freeze. -
Storage buffer
pH: 7.20
Constituent: PBS -
Carrier free
Yes -
Concentration information loading...
-
Purity
Protein A purified -
Clonality
Monoclonal -
Clone number
EPR3113 -
Isotype
IgG -
Research areas
Associated products
-
Alternative Versions
-
Compatible Secondaries
-
Conjugation kits
-
Isotype control
-
Recombinant Protein
Applications
The Abpromise guarantee
Our Abpromise guarantee covers the use of ab184783 in the following tested applications.
The application notes include recommended starting dilutions; optimal dilutions/concentrations should be determined by the end user.
Application | Abreviews | Notes |
---|---|---|
Flow Cyt (Intra) |
Use at an assay dependent concentration.
ab199376 - Rabbit monoclonal IgG, is suitable for use as an isotype control with this antibody. |
|
WB |
Use at an assay dependent concentration. Predicted molecular weight: 103 kDa.
Can be blocked with Neuropilin 1 peptide (ab189308). |
|
IHC-P |
Use at an assay dependent concentration. Perform heat mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol.
|
|
IP |
Use at an assay dependent concentration.
|
|
ICC/IF |
Use at an assay dependent concentration.
|
Notes |
---|
Flow Cyt (Intra)
Use at an assay dependent concentration. ab199376 - Rabbit monoclonal IgG, is suitable for use as an isotype control with this antibody. |
WB
Use at an assay dependent concentration. Predicted molecular weight: 103 kDa. Can be blocked with Neuropilin 1 peptide (ab189308). |
IHC-P
Use at an assay dependent concentration. Perform heat mediated antigen retrieval with Tris/EDTA buffer pH 9.0 before commencing with IHC staining protocol. |
IP
Use at an assay dependent concentration. |
ICC/IF
Use at an assay dependent concentration. |
Target
-
Function
The membrane-bound isoform 1 is a receptor involved in the development of the cardiovascular system, in angiogenesis, in the formation of certain neuronal circuits and in organogenesis outside the nervous system. It mediates the chemorepulsant activity of semaphorins. It binds to semaphorin 3A, The PLGF-2 isoform of PGF, The VEGF-165 isoform of VEGF and VEGF-B. Coexpression with KDR results in increased VEGF-165 binding to KDR as well as increased chemotaxis. It may regulate VEGF-induced angiogenesis.
The soluble isoform 2 binds VEGF-165 and appears to inhibit its binding to cells. It may also induce apoptosis by sequestering VEGF-165. May bind as well various members of the semaphorin family. Its expression has an averse effect on blood vessel number and integrity. -
Tissue specificity
The expression of isoforms 1 and 2 does not seem to overlap. Isoform 1 is expressed by the blood vessels of different tissues. In the developing embryo it is found predominantly in the nervous system. In adult tissues, it is highly expressed in heart and placenta; moderately in lung, liver, skeletal muscle, kidney and pancreas; and low in adult brain. Isoform 2 is found in liver hepatocytes, kidney distal and proximal tubules. -
Sequence similarities
Belongs to the neuropilin family.
Contains 2 CUB domains.
Contains 2 F5/8 type C domains.
Contains 1 MAM domain. -
Cellular localization
Secreted and Cell membrane. - Information by UniProt
-
Database links
- Entrez Gene: 8829 Human
- Entrez Gene: 18186 Mouse
- Entrez Gene: 246331 Rat
- Omim: 602069 Human
- SwissProt: O14786 Human
- SwissProt: P97333 Mouse
- SwissProt: Q9QWJ9 Rat
- Unigene: 131704 Human
see all -
Alternative names
- A5 protein antibody
- BDCA4 antibody
- BLOOD DENDRITIC CELL ANTIGEN 4 antibody
see all
Images
-
All lanes : Anti-Neuropilin 1 antibody [EPR3113] (ab81321) at 1/1000 dilution
Lane 1 : Wild-type A549 cell lysate
Lane 2 : NRP1 knockout A549 cell lysate
Lane 3 : MDA-MB-231 cell lysate
Lane 4 : SK-BR-3 cell lysate
Lysates/proteins at 20 µg per lane.
Performed under reducing conditions.
Predicted band size: 103 kDa
Observed band size: 125-135 kDa why is the actual band size different from the predicted?False colour image of Western blot: Anti-Neuropilin 1 antibody [EPR3113] staining at 1/1000 dilution, shown in green; Mouse anti-GAPDH antibody [6C5] (ab8245) loading control staining at 1/20000 dilution, shown in red. In Western blot, ab81321 was shown to bind specifically to Neuropilin 1. A band was observed at 125-135 kDa in wild-type A549 cell lysates with no signal observed at this size in NRP1 knockout cell line ab269507 (knockout cell lysate ab269669). To generate this image, wild-type and NRP1 knockout A549 cell lysates were analysed. First, samples were run on an SDS-PAGE gel then transferred onto a nitrocellulose membrane. Membranes were blocked in 3 % milk in TBS-0.1 % Tween® 20 (TBS-T) before incubation with primary antibodies overnight at 4°C. Blots were washed four times in TBS-T, incubated with secondary antibodies for 1 h at room temperature, washed again four times then imaged. Secondary antibodies used were Goat anti-Rabbit IgG H&L (IRDye® 800CW) preabsorbed (ab216773) and Goat anti-Mouse IgG H&L (IRDye® 680RD) preabsorbed (ab216776) at 1/20000 dilution.
-
Flow Cytometry (Intracellular) - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Intracellular Flow Cytometry analysis of MCF7 cells labelling Neuropilin 1 with purified ab81321 at 1/70 (red). Cells were fixed with 2% paraformaldehyde. A FITC-conjugated goat anti-rabbit IgG (1/150) was used as the secondary antibody. Black - Isotype control, rabbit monoclonal IgG. Blue - Unlabelled control, cells without incubation with primary and secondary antibodies.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
-
Immunocytochemistry/ Immunofluorescence - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)Image from Pérez-Lozano ML et al. PLoS One. 2013;8(4):e60776. Fig 5.; doi: 10.1371/journal.pone.0060776.
The expression of Neuropilin 1, VEGFR-2, and VEGF was analyzed by immunofluorescence microscopy in omentum and effluent-derived mesothelial cells (MCs). MCs were double stained for Neuropilin 1 (green) and VEGFR-2 (red), and single stained for VEGF (green). Nuclei were stained with DAPI. Neuropilin 1 and VEGF show a membrane distribution in omentum and epithelioid MCs (b, c, h, i). During in vitro (e, f) and ex vivo (k, l) MMT both proteins change their localization and are internalized. The expression of VEGFR-2 is down-regulated but it does not show differences in localization during in vitro (a, d) and ex vivo (g, j) MMT.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
-
Neuropilin 1 was immunoprecipitated from 0.35mg mouse heart lysate with ab81321 at 1/30 dilution (2μg in 0.35mg lysates). Western blot was performed on the immunoprecipitate using ab81321 at 1/1000 dilution (0.77 μg/mL). VeriBlot for IP Detection Reagent (HRP) (ab131366) was used as the secondary antibody at 1/1000 dilution.
Lane 1: Mouse heart tissue lysate 10 μg
Lane 2: Mouse heart tissue lysate
Lane 3: Rabbit monoclonal IgG (ab172730) instead of ab81321 in mouse heart lysate.Blocking and dilution buffer and concentration: 5% NFDM/TBST.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
-
Immunocytochemistry/ Immunofluorescence - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Clone EPR3113 (ab184783) has been successfully conjugated by Abcam. This image was generated using Anti-Neuropilin 1 antibody [EPR3113] (PE). Please refer to ab209445 for protocol details.
ab209445 staining Neuropilin 1 in MCF7 cells. The cells were fixed with 4% formaldehyde (10 min), permeabilized with 0.1% Triton X-100 for 5 minutes and then blocked with 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween for 1h. The cells were then incubated overnight at +4°C with ab209445 at 1/100 dilution (Pseudocolored in green) and ab195884, Rat monoclonal to Tubulin (Alexa Fluor® 647), at 1/250 dilution (shown in red). Nuclear DNA was labelled with DAPI (shown in blue).
Image was taken with a confocal microscope (Leica-Microsystems, TCS SP8).
-
Flow Cytometry (Intracellular) - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Overlay histogram showing HepG2 cells stained with unpurified ab81321 (red line). The cells were fixed with 4% paraformaldehyde (10 min) and then permeabilized with 0.1% PBS-Tween for 20 min. The cells were then incubated in 1x PBS / 10% normal goat serum / 0.3M glycine to block non-specific protein-protein interactions followed by the antibody (unpurified ab81321, 1/50 dilution) for 30 min at 22°C. The secondary antibody used was DyLight® 488 goat anti-rabbit IgG (H+L) (ab96899) at 1/500 dilution for 30 min at 22°C. Isotype control antibody (black line) was rabbit monoclonal IgG (0.5µg/1x106 cells) used under the same conditions. Acquisition of >5,000 events was performed. This antibody gave a significantly decreased signal in HepG2 cells fixed with methanol (5 min)/permeabilized in 0.1% PBS-Tween used under the same conditions.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
-
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) analysis of human liver tissue labelling Neuropilin 1 with purified ab81321 at 1/400. Heat mediated antigen retrieval was performed using Tris/EDTA buffer pH 9. ab97051, a HRP-conjugated goat anti-rabbit IgG (H+L) was used as the secondary antibody (1/500). Negative control using PBS instead of primary antibody. Counterstained with hematoxylin.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
-
Immunohistochemistry (Formalin/PFA-fixed paraffin-embedded sections) - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)This image is courtesy of an Abreview submitted by Manoj Kumar Valluru.
Unpurified ab81321 staining Neuropilin 1 in mouse brain tissue sections by Immunohistochemistry (IHC-P - formaldehyde-fixed, paraffin-embedded sections). Tissue was fixed with formaldehyde and blocked with 10% serum for 1 hour at room temperature; antigen retrieval was by heat mediation in citrate buffer (pH 6). Samples were incubated with primary antibody (1/100 in PBS + 2% blocking serum) for 16 hours at 4°C. A biotin-conjugated goat anti-rabbit IgG polyclonal (1/250) was used as the secondary antibody.
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
-
Immunocytochemistry/ Immunofluorescence - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Clone EPR3113 (ab184783) has been successfully conjugated by Abcam. This image was generated using Anti-Neuropilin 1 antibody [EPR3113] (Alexa Fluor® 647). Please refer to ab198323 for protocol details.
ab198323 staining Neuropilin 1 in HeLa cells. The cells were fixed with 4% formaldehyde (10 min), permeabilised in 0.1% Triton X-100 for 5 minutes and then blocked in 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween for 1h. The cells were then incubated with ab198323 at 1/100 dilution (shown in red) and ab195887, Mouse monoclonal [DM1A] to alpha Tubulin (Alexa Fluor® 488, shown in green) at 1/167 dilution overnight at +4°C. Nuclear DNA was labelled in blue with DAPI.
Image was taken with a confocal microscope (Leica-Microsystems, TCS SP8).
-
Immunocytochemistry/ Immunofluorescence - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Clone EPR3113 (ab184783) has been successfully conjugated by Abcam. This image was generated using Anti-Neuropilin 1 antibody [EPR3113] (Alexa Fluor® 488). Please refer to ab197644 for protocol details.
ab197644 staining Neuropilin 1 in MCF7 cells. The cells were fixed with 4% formaldehyde (10 min), permeabilized with 0.1% Triton X-100 for 5 minutes and then blocked with 1% BSA/10% normal goat serum/0.3M glycine in 0.1% PBS-Tween for 1h. The cells were then incubated overnight at +4°C with ab197644 at 1/100 dilution (shown in green) and ab195889, Mouse monoclonal to alpha Tubulin (Alexa Fluor® 594), at 1/250 dilution (shown in red). Nuclear DNA was labelled with DAPI (shown in blue).
Image was taken with a confocal microscope (Leica-Microsystems, TCS SP8).
-
Immunocytochemistry/ Immunofluorescence - Anti-Neuropilin 1 antibody [EPR3113] - BSA and Azide free (ab184783)
Immunocytochemistry/Immunofluorescence analysis of HUVEC cells labelling Neuropilin 1 with purified ab81321 at 1/250. Cells were fixed with 4% paraformaldehyde and permeabilized with 0.1% Triton X-100. ab150077, an Alexa Fluor® 488-conjugated goat anti-rabbit IgG (1/500) was used as the secondary antibody. DAPI (blue) was used as the nuclear counterstain. ab7291, a mouse anti-tubulin (1/1000) and ab150120, an Alexa Fluor® 594-conjugated goat anti-mouse IgG (1/500) were also used.
Control 1: primary antibody (1/250) and secondary antibody, ab150120, an Alexa Fluor® 594-conjugated goat anti-mouse IgG (1/500).
Control 2: ab7291 (1/1000) and secondary antibody, ab150077, an Alexa Fluor® 488-conjugated goat anti-rabbit IgG (1/500).
This data was developed using the same antibody clone in a different buffer formulation containing PBS, BSA, glycerol, and sodium azide (ab81321).
Protocols
Datasheets and documents
-
Datasheet download
Certificate of Compliance
References (0)
ab184783 has not yet been referenced specifically in any publications.